This is the electric powered, 2.4GHz radio controlled 1/10 scale, ready to run
                  ADX-10 Race Buggy with Painted Body from Aarma.

FEATURES: Chassis: Twin vertical aluminum plate
            with double chassis rails and alloy front chassis plate, batteries
            fit under chassis-no need to remove body to change batteries
          Drive: Rear wheel with steel driveshafts and axles
          Motor: 15 turn brushed
          Radio: ATX300 2.4GHz 3-channel with lightweight ARX300 receiver,
            transmitter can be converted for left or right hand use, seven
            position adjustable steering wheel, digital trim,
            servo reverse, end-point adjustment and failsafe
          Electronic Speed Control: Waterproof MEGA ESC with LiPo cutoff
          Receiver Box: Splash and dust proof
          Electronic Speed Control: Waterproof MEGA ESC with LiPo cutoff
          Battery: 1500mAh 6-Cell NiMH stick pack with standard connector
          Battery Charger: AC wall type
          Pinion Gear: 48 pitch 22 tooth steel
          Spur Gear: 81 tooth 48 pitch composite plastic
          Body: Trimmed and painted "Ripper" polycarbonate three color body
            with race legal polycarbonate rear wing
          Transmission: Metal gear, brushless ready
          Slipper Clutch: Machined alloy gears, adjustable for different track
            conditions
          Suspension: Fully independent
          Differential: Metal gear, oil filled
          Shocks: Oil-filled
          Tires: dBoots Terrabyte multirib with dBoots foam inserts
          Wheels: Dish type black in color
          Camber: Adjustable front and rear, camber refers to the angle of the
            tops of the tires from vertical when viewed from front or behind
            vehicle
          Caster: Adjustable, caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to
            the chassis
          Steering: Bellcrank type with composite servo saver
          Warranty: Two year limited warranty beginning at date of purchase

INCLUDES: RTR ADX-10 Race Buggy with Painted Body and 2.4GHz Radio, ESC,
            Steering Servo, 15T Motor, Tires, Wheels, Foam Inserts, Decals,
            Instruction Manual, Battery and Charger

REQUIRES: AA Batteries: Four for transmitter
          Building and track equipment

SPECS:      Vehicle-
          Length: 15.7" (400mm)
          Width:   9.6" (245mm)
          Height:  6.1" (155mm)
          Wheelbase: 11.4" (290mm)
          Ride Height: 1.25" (32mm)
          Weight: 2.97lbs (1350g) without battery
            Body-
          Length: 12.5" (317mm)
          Width:   5.5" (140mm)
          Height:  2.9" (74mm)

COMMENTS: Available in the following body colors;
            Blue, ARAD02BB
            Green, ARAD02GG
            Red, ARAD02RR

          If wanting to upgrade to a brushless motor, the Duratrax Element
            3900kV Brushless Power System (DTXC3122) is a ideal choice.
          The stock 81 tooth 48 pitch spur gear can be used. A 48 pitch
            25T pinion gear (RRPC1025) is recommended.

          For replacement or to upgrade to ball bearings use:
            Qty.  Size      Location        Qty.      Bearing Set
             4   5x10mm    Fr Hubs           2         DTXC1535
             4   5x13mm    Rear Hubs         2         ARAC3201
             2   10x15mm   Idler gear        1         DTXC1595
             4   5x10mm    Gearbox           2         DTXC1535

                                                                   jxs 09/24/12
                                                                         ir/jxs