This is the electric powered, 2.4GHz radio controlled 1/10 scale, ready to run
                Mojave Desert Truck with Painted Body from Arrma.

FEATURES: Chassis: Twin vertical aluminum plate
            with double chassis rails and alloy front chassis plate, batteries
            fit under chassis-no need to remove body to change batteries
          Drive: Rear wheel with steel driveshafts and axles
          Motor: 15 turn brushed
          Radio: ATX300 2.4GHz 3-channel with lightweight ARX300 receiver,
            transmitter can be converted for left or right hand use, seven
            position adjustable steering wheel, digital trim,
            servo reverse, end-point adjustment and failsafe
          Electronic Speed Control: Waterproof MEGA ESC with LiPo cutoff
          Receiver Box: Splash and dust proof
          Battery: 1500mAh 6-Cell NiMH stick pack with standard connector
          Battery Charger: AC wall type
          Pinion Gear: 48 pitch 18 tooth steel
          Spur Gear: Composite plastic 87 tooth 48 pitch
          Body: Trimmed and painted "Smash" polycarbonate body
          Transmission: Metal gear, brushless ready
          Slipper Clutch: Machined alloy gears, adjustable for different track
            conditions
          Suspension: Fully independent
          Differential: Metal gear, oil filled
          Shocks: Oil-filled
          Tires: dBoots Sand Scorpion with dBoots foam inserts
          Wheels: Eight spoke chrome desert truck style
          Camber: Adjustable front and rear, camber refers to the angle of the
            tops of the tires from vertical when viewed from front or behind
            vehicle
          Caster: Adjustable, caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to
            the chassis
          Steering: Bellcrank type with composite servo saver
          Warranty: Two year limited warranty beginning at date of purchase

INCLUDES: RTR Mojave Desert Truck with Orange Body and 2.4GHz Radio, ESC,
            Steering Servo, 15T Motor, Tires, Wheels, Foam Inserts, Decals,
            Instruction Manual, Battery and Charger

REQUIRES: AA Batteries: Four for transmitter
          Building and track equipment

SPECS:      Vehicle-
          Length: 21.5" (540mm)
          Width:  11.6" (295mm)
          Height:  8.3" (210mm)
          Wheelbase: 13" (330mm)
          Ride Height: 1.6" (40mm)
          Weight: 4.2lbs (1900g) without battery
            Body-
          Length: 21.2" (540mm)
          Width:  10"   (255mm) behind front wheels, narrowest point
                  11.6" (294mm) at rear wheels, widest point
          Height:  6.4" (163mm)

COMMENTS: Available in the following body colors;
           Green, ARAD06GG
           Orange, ARAD06NN
           Purple, ARAD06PP

          If wanting to upgrade to a brushless motor, the Duratrax Element
            3900kV Brushless Power System (DTXC3122) is a ideal choice.
          The stock 87 tooth 48 pitch spur gear can be used. A 48 pitch
            21T pinion gear (RRPC1021) is recommended.

          For replacement or to upgrade to ball bearings use:
            Qty.  Size      Location        Qty.      Bearing Set
             4   5x10mm    Fr Hubs           2         DTXC1535
             4   5x13mm    Rear Hubs         2         ARAC3201
             2   10x15mm   Idler gear        1         DTXC1595
             4   5x10mm    Gearbox           2         DTXC1535

                                                                   jxs 09/24/12
                                                                         ir/jxs