HPI Racing 1/10 Sprint 2 Falken Tire Porsche 911 RTR

Tower Stock# LXCWGB  •  Manufacturer Stock# 108220
HPI Racing 1/10 Sprint 2 Falken Tire Porsche 911 RTR (large view)
Easy Pay
Request 3 Payments ($86.67, $86.66, $86.66) Details
Notes from our tech department:
This is the 1/10 scale, electric powered, 2.4GHz radio controlled,
RTR HPI On-Road Sprint 2 Drift Car
with the Falken Tire Porsche 911 GT3 RSR Body.


Chassis: 3/16" (4mm) thick plastic
Drive: Four wheel belt drive
Motor: Firebolt 15 turn brushed
Radio: 2.4GHz with waterproof steering servo and waterproof
receiver box
Electronic Speed Control: HPI SC-15WP LiPo compatible, waterproof
and reversible
Battery: HPI Plazma NiMH 7.2V 2000mAh with Standard connector
Battery Charger: AC wall type
Ball Bearings: Full set included
Shocks: Oil-filled, plastic bodied with special drifting springs
Differentials: Planetary gear with metal outdrives
Transmission: Single speed
Tires: Rubber slicks, width 1.2" (30mm) front, 1.3" (33mm) rear
2.5" (63mm) diameter
Wheels: BBS lace pattern, black in color
Pinion Gear: 28 tooth 48 pitch metal
Spur Gear: 48 pitch, 87 tooth, composite construction
Body: Painted and trimmed Porsche 911 GT3 RSR
Bumper: Front, foam
Suspension: Fully adjustable
Ackerman: Adjustable, Ackerman describes the effect of the inner
front wheel turning faster than the outer front wheel during turns
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
Camber: Adjustable front and rear, camber refers to the angle of the
tops of the tires from vertical when viewed from front or behind
Steering: Ball race bell-crank type with servo saver
Warranty: Two year limited warranty through HPI beginning at purchase
date. Valid only in the USA, Canada and South America


HPI On-Road Drift Porsche 911 with motor, electronic speed
control, painted body, drift tires, wheels, 28 tooth pinion gear
4 AA batteries for radio, 2000mAH battery, wall charger,
87 tooth spur gear, 2.4GHz radio, steering servo, decal sheet, 15T
motor and instructions


Misc. Items: Building and track equipment


Length: 17" (431mm)
Width: 7.5" (190mm) - 8.0" (203mm) adjustable using offset
Height: 5" (127mm)
Wheelbase: 10" (255mm)
Front Track: 7.38" (187.5mm) side to side at outer edges of wheel
Paint: Polycarbonate safe spray or brush-on
Misc. Items: Building and track equipment
Front Tread: 6.5" (166mm)
Rear Tread: 7.2" (183mm) side-to-side at wheel centers
Ground Clearance: 0.5" (13mm)
Length: 19.1" (485mm)
Width: 8.27" (210mm)
Height: 4.61" (117mm)


For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
4 5x10mm Fr Wheels 2 DTXC1535
4 5x10mm Rear Wheels 2 DTXC1535
2 10x15mm Fr Diff 1 DTXC1595
2 2x8mm Fr Diff 1 DTXC1523
2 10x15mm Rear Diff 1 DTXC1595
2 2x8mm Rear Diff 1 DTXC1523
2 4x8mm Servo Saver 1 DTXC1511
2 4x8mm Middle Lay Shaft 1 DTXC1511

jxs 10/29/12

See Tower Catalog page 91.
Easy RC: Cars & Trucks
‐ Manufacturer's Web Page ‐
‐ Mailing Address ‐
‐ Additional Contact Information ‐