Associated 1/10 SC10 KMC Wheel/RC10.com RTR

Tower Stock# LXCXXK  •  Manufacturer Stock# 7030
Associated 1/10 SC10 KMC Wheel/RC10.com RTR (large view)
Money Saving Combos
 
LZ1916
Regularly Purchased Together
Although customers also purchased these, compatibility is not guaranteed. Click an item for product details.

Notes from our tech department:
This is the electric powered, radio controlled, 1/10 scale, ready to run
SC10 Short Course Race Truck with the KMC Wheel Body Trim from Associated.

FEATURES

Chassis: Molded composite low CG design with side nerf bars,
hinged battery hold down strap fits NiMH and LiPo battery packs
Drive: Rear wheel with steel rear dogbone drive shafts
Motor: Associated Reedy Radon 17 turn
Radio: Associated 2-channel 2.4GHz
ESC: Associated XP SC200 forward/reverse with LiPo low voltage cut-
off, reverse lockout, and Dean's connector
Shocks: Oil-filled with blue aluminum bodies
Body: 0.040" (1mm) thick painted and trimmed with KMC Wheel body trim
Differential: Sealed, planetary gear
Spur Gear: 87 tooth
Slipper Clutch: Dual sided, externally adjustable
Wheels: KMC style, 3" (76mm) diameter, 1.6" (41mm) wide, black in
color
Tires: Multi terrain scale with reinforced sidewalls, 4.25" (108mm)
diameter, 1.7" (43mm) wide
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Bumpers: Front and rear with functional rear rubber mud flaps
Ball Bearings: 14 rubber sealed
Suspension: Fully adjustable with steel turnbuckles
Steering: Angled bellcrank "coplanar" steering with integral servo
saver

INCLUDES

SC10 Short Course Race Truck Kit from Associated with tires, wheels,
painted body, motor, radio and instruction manual

REQUIREMENTS

Battery: 6-7 cell NiMH stick pack or 2-cell LiPo pack w/Dean's
connector
Battery Charger: Depending on selected battery type
Transmitter Batteries: Eight AA-size
Building and track equipment

SPECIFICATIONS

Vehicle-
Length: 21.6" (550mm)
Width: 11.5" (293mm)
Track: 9.6" (245mm)
Weight: 4.6lbs (2080g)
Wheelbase: 12.9" (327mm)
Internal Gear Ratio: 2.6:1
Body-
Length 21.6" (550mm)
Width 11.5" (293mm) at front fenders, widest point
8.8" (224mm) at center section, narrowest point
Height: 6" (153mm)

COMMENTS

For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 6x10mm Transmission 1 DTXC1561
2 3/16 x 3/8" Transmission 1 DTXC1423
2 3/16 x 3/8" Idler Gear 1 DTXC1423
4 3/16 x 3/8" Rear Hubs 2 DTXC1423
4 3/16 x 3/8" Front Hubs 2 DTXC1423

jxs 10/18/12
ir/jxs

Resources
See Tower Catalog page 82.
Easy RC: Cars & Trucks
‐ Mailing Address ‐
‐ Additional Contact Information ‐