This is the 1/10 scale Brushless Electric Powered, 2.4GHz Radio Controlled,
              RTR Associated RC10 B4.1 Buggy with LiPo Battery.

FEATURES: Chassis: Molded composite bathtub style with set screw antenna tube
            lock
          Drive: Two wheel
          Transmission: 2.6:1 laydown type, high-torque capacity, sealed
            differential with bevel gears and dual sided adjustable slipper
            clutch
          Brushless Motor: Reedy 540R 3300kV sensorless
          Radio: XP 2.4GHz system with SVH1504MG steering servo
          ESC: XP SC450-BL brushless compatible with LiPo cutoff, reverse and
            reverse lockout
          Battery: Reedy 2S 7.4V 25C 3000mAh WolfPack LiPo with Deans connector
            and JST XH (ElectriFly Style) balance plug
          Battery Charger: Reedy 526-S AC/DC balance charger
          Shocks: Oil-filled, aluminum body
          Dog Bones: MIP CVDs
          Spur Gear: Plastic, 81 tooth, 48 pitch
          Front Tires: 2.2" (55.88mm), 1" (26mm) wide with foam inserts
          Rear Tires:  3.15" (80mm), inner diameter 2.2" (55.88mm) with foam
            inserts
          Wheels: White dish front; diameter 2.2" (55.88mm), width 0.87"
            (22.31mm), rear; diameter 2.2" (55.88mm), width 1.42" (36.08mm)
          Body: Polycarbonate, trimmed and painted Interceptor 2.0
          Caster: Adjustable, caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to the
            chassis
          Camber: Adjustable, camber refers to the angle of the tops of the
            tires from vertical when viewed from front or behind vehicle
          Toe-In: Fully adjustable, with titanium turnbuckles, toe-in describes
            the angle of the front tires as viewed from the top
          Steering: Angled-bellcrank design to minimize bump steer and maintain
            constant steering angles throughout the range of suspension travel
            Forward-swept front end design provides maximum front end ground
            clearance
          Servo saver: Built-in, with heavy duty spring
          Battery Strap: Nylon

INCLUDES: Associated RC10 B4.1 RTR Buggy with Brushless Motor, 7.4V LiPo
            Battery, Charger with Balancer, 2.4GHz Radio, ESC, Painted Body,
            and Instruction Manual

REQUIRES: AA Batteries: Eight
          LiPo charging bag
          Track and maintenance equipment

SPECS:      Vehicle;
          Length:  14.8" (377mm)
          Width: 9.8" (250mm)
          Weight: 3.4lbs (1530g) running weight will vary depending on parts
            installed
          Wheelbase: 10.7" (273mm)
          Internal Gear Ratio: 2.6:1
            Body;
          Length: 11" (276mm)
          Width:  6.2" (159mm)
          Height: 2.4" (60mm)

COMMENTS: The DuraTrax Element 3900kV Brushless System (DTXC3122) is an ideal,
            affordable upgrade for this vehicle.

         For Replacement or to upgrade to Ball Bearings use:
            Qty.   Size           Location               Qty.   Bearing Set
             2    3/16x3/8"      Transmission             1       DTXC1423
             2    10x16mm        Transmission             1       ASCC9832
             2    3/16x3/8"      Rear Hubs                1       DTXC1423
             2    .187x0.50x.196 Rear Hubs                1       ASCC7935
             4    3/16x3/8"      Front Hubs               1       DTXC1423

                                                                   jxs 10/23/12
                                                                         ir/jxs