This is the 1/10 scale electric powered, 2.4GHz radio controlled,
         ready to run HPI 1969 Ford Mustang Sprint 2 Sport Drift Car.

FEATURES: Chassis: Composite plastic
          Drive: Four wheel belt with alloy steel dog bones
          Motor: 15T with orange anodized aluminum motor mount, and 23T 48P
            steel pinion gear
          Radio: 2.4GHz HPI TF-40 3-channel with waterproof SF-10W steering
            servo
          ESC: HPI SC15WP LiPo compatible waterproof and reversible
          Battery: 7.2V NiMH 2000mAh with Standard connector
          Battery Charger: 110V wall type
          Spur Gear: 48P 90T composite
          Body: Trimmed and painted highly detailed licensed 1969 Ford Mustang
            replica with adjustable height body mounts that allow a variety of
            bodies to be used
          Differential: Planetary gear type with sealed case
          Ball Bearings: Full set
          Wheels: Two sets of 5-Spoke, two tone green with 12mm hex, 1.02"
            (26mm) wide, 2.00" (51mm) diameter
          Tires X-pattern radial touring mounted tires with extra set of T-
            drift tires
          Caster: Adjustable, caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to
            the chassis
          Camber: Adjustable front and rear, camber refers to the angle of the
            tops of the tires from vertical when viewed from front or behind
            vehicle
          Ackerman: Adjustable, Ackerman describes the effect of the inner
            front wheel rotating faster than the outer front wheel during
            turns
          Bumper: Front foam
          Warranty: Two year limited warranty through HPI beginning at date of
            purchase. Warranty valid only in the U.S., Canada and South America

INCLUDES: RTR HPI 1969 Ford Mustang Sprint 2, 2.4GHz Radio, 15T Brushed Motor
            Touring Tires, Drift Tires, Eight Wheels, ESC, four AA Batteries,
            Wall Charger, and Instructions

REQUIRES: Track equipment

SPECS:      Vehicle,
          Length: 17"(431mm)
          Width:  7.5"-8.0"(190mm to 200mm)adjustable using offset wheels
          Height: 5"(127mm)
          Wheelbase: 10"(254mm)
            Body,
          Length: 17.4" (441mm)
          Width:  7.5" (190mm)
          Height: 4.1" (105mm)

COMMENTS: For Replacement Ball Bearings use:
           Qty.  Size      Location              Qty     Bearing Set
            4   5x10mm    Front Axle              2       DTXC1535
            4   5x10mm    Rear Axle               2       DTXC1535
            2   4x8mm     Steering                1       DTXC1511
            2   10x15mm   Differential            1       DTXC1595
            1   4x8mm     Spur Gear Mount         1       DTXC1511

                                                                   jxs 12/12/12
                                                                         ir/jxs