HB Racing 1/10 R10 Nitro Touring Car Kit

Tower Stock# LXCZRG  •  Manufacturer Stock# 108382
HB Racing 1/10 R10 Nitro Touring Car Kit (large view)
Notes from our tech department:
This is the Hot Bodies Glow Powered, Radio Controlled 1/10 scale
HB R10 Touring Car Kit.


Chassis: CNC machined aircraft aluminum with woven graphite upper
deck and radio tray with separate upper and lower bulkheads
for quick diff changes and belt tension adjustment
Drive: Four wheel belt drive with front and rear universal
driveshafts, drivetrain equipped with lightweight hardened aluminum
pulleys for low friction, decreased rotating mass and long life
Transmission: 2-speed with 0.08 module gears with smaller teeth for
lower rotational mass and longer gear life
Suspension: Multiple pivot point adjustment for fine roll center
tuning, adjustable sway bars
Shocks: Oil-filled aluminum body
Shock Towers: 0.14" (3.5mm) thick woven graphite
Engine Mount: Four-piece, compatible with O.S and Novarossi engines
Spur Gears: 59T 1st and 54T 2nd gear composite construction
Pinion Gears: Steel 16T 1st gear, 21T 2nd gear
Bumper: Front foam
Brake: Single disc
Fuel Tank: 2.5oz (75cc)
Steering: Woven graphite arms, servo saver
with adjustable Ackerman, Ackerman refers to the effect of the
inner front wheel turning faster than the outer front wheel during
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
Camber: Adjustable front and rear, camber refers to the angle
of the tops of the tires from vertical when viewed from front or
behind vehicle, titanium turnbuckles and camber links


HB R10 Touring Car Kit with shocks, engine mount, bumper, instruction
manual, fuel tank, decals


Radio: 2-channel with high speed steering servo
Engine: .12 cu in (2.0cc) rear exhaust with slide valve carb
Exhaust: Tuned pipe
Tires: 1/10 scale touring type
Wheels: 1/10 scale touring type with 12mm hex
Body: 1/10 scale touring car, 7.9" (200mm) wide
Fuel, glow starter, building and track equipment


Length: 14.4" (366mm)
Width: 7.9" (200mm)
Wheelbase: 10.3" (261mm)
Weight: 3.75lbs (1700g)
Gear Ratio: 1st 7.56:1.0
2nd 5.27:1.0


For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 10x15mm Fr Upright 1 DTXC1595
2 6x12mm Fr Upright 1 DTXC1569
2 10x15mm Fr Diff 1 DTXC1595
2 10x15mm Rear Diff 1 DTXC1595
2 6x12mm Middle Shaft 1 DTXC1569
1 6x12mm 2-sp Shaft 1 DTXC1569
2 10x15mm Rear Upright 1 DTXC1595
2 6x12mm Rear Upright 1 DTXC1569
2 5x8mm Steering 1 DTXC1523
1 5x10mm Clutch 1 DTXC1535
2 5x8mm Clutch 1 DTXC1523

jxs 01/16/13

See Tower Catalog page 95.
Easy RC: Cars & Trucks
‐ Mailing Address ‐
‐ Additional Contact Information ‐