This is the radio controlled, electric powered 1/10 scale,
                Mitsubishi Lancer EVO VII GT1 On-Road Car Kit.
                This car can be used in Tamiya Official Races.

FEATURES: Chassis: TT-01 type E composite chassis-compatible with a variety of
            Tamiya Option Parts
          Drive: Four wheel shaft drive
          Electronic Speed Control: Tamiya TEU-105BK with reverse, TAMC5055
          Motor: 540 motor with pre-attached leads
          Ball Bearings: Installed in differentials, bushings in wheel hubs
          Shocks: Friction type (not oil-filled), plastic body
          Gearbox: Sealed, front and rear
          Differentials: Bevel gear, ball bearing equipped
          Transmission: Single speed
          Body: Clear untrimmed, with window mask and body trim decals
          Tires: Rubber radial 0.94" (24mm) wide, 2.5" (63.5mm) diameter
          Wheels: Two sets, +2° offset, lace pattern blue in color, and five
            spoke white with no offset, both 2.0" (52mm) outer diameter,
            0.94" (24mm) wide
          Bumper: Front foam
          Suspension: Independent double wishbone
          Camber: Non-adjustable, camber refers to the angle of the tops of the
            tires from vertical when viewed from front or behind vehicle
          Caster: Adjustable, caster/toe-in refers to the angle of the
            front suspension when viewed from the side of the car in relation
            to the chassis
          Steering: Bell-crank type with servo saver

INCLUDES: TT-01 Type E chassis, 540 motor, ESC, clear Mitsubishi body, tires,
            foam bumper, 19 tooth pinion gear, 61 tooth spur gear, window
            mask decals, two sets of wheels and instruction manual

REQUIRES: Radio: 2-channel with one standard servo
          Radio Batteries: 8 AA size (for transmitter)
          Battery: 6-cell stick pack with standard connector
          Charger: AC/DC timed or peak for 6-cell battery
          Misc. Items: Building and track equipment

SPECS:     VEHICLE-
          Length:    15.7" (400mm)
          Width:      7.2" (183mm)
          Height:     5.5" (140mm)
          Wheelbase: 10.1" (257mm)
             BODY-
          Length:   17.3"  (440mm)
          Width:     7.01" (178mm)
          Height:    4.3"  (110mm)

COMMENTS: For replacement, or to upgrade to Ball Bearings use:
            Qty.  Size      Location               Qty.    Bearing Set
             2   5x11mm     Front Hubs              1       DTXC1547
             2   5x11mm     Rear Hubs               1       DTXC1547
             2   8x12mm     Front Diff              1       DTXC1581
             2   8x12mm     Rear Diff               1       DTXC1581
             2   5x11mm     Fr Driveshaft Joint     1       DTXC1547
             2   5x11mm     Rear Driveshaft Joint   1       DTXC1547

          Body shown on box is painted yellow with all body detail decals
            applied.

                                                                   jxs 12/27/12
                                                                         ir/jxs