This is the optional DuraTrax Ultralite 15 Tooth Clutch Bell
                           for the DuraTrax Warhead.
         Also fits other vehicles such as some Kyosho 1/8 and 1/10
             Scale Cars, As Well As the Pirate and Mugen Cars.

FEATURES: Non-Full Length Teeth for Reduced Weight and Faster Acceleration.
          Made of Hardened Steel for Long Life and Precision Gear Mesh.
          Choose from 13 to 18 Tooth Count for Any Racer's Needs.

INCLUDES: One 15 Tooth Clutch Bell

REQUIRES: Different Sized Clutch Bearings: Two 5x10mm (DTXC1535)

COMMENTS: To use this clutch bell with an OS .21 engine, you must also
            purchase a 1/4-28 clutch nut
          To use this clutch bell with the CZ series OS engines, you must
            also purchase a 5mm clutch nut
          When using this on the older Rampage series of cars, you may have
            to move the throttle servo forward to compensate for the longer
            bell and nut.
          WILL NOT WORK ON THE DURATRAX CONVERSION KITS, Sandmasters or
            RC10 Gas Trucks.
          The bell housing is now solid and no longer vented or slotted.
                                                                     axy3/24/98
                                                                          ir/jl
                                                               updateaxy2/22/99