This is a Remote Safety Ignitor (Remote Glow Ignitor) for In-Cowl Engines.
This provides an external glow driver socket that is wired directly
to the actual glow plug and grounded to one engine head bolt.
FEATURES: Can be used on any single cylinder engine.
For use with any car, helicopter, plane or boat where the glow plug
is in a hard to reach spot or is close to a propellor.
Dust cover is attached with a pin and rotates left or right, opening
so glow driver can be inserted into the recessed socket.
Ignitor socket is made of black plastic.
INCLUDES: One Pre-Assembled Remote Safety Ignitor with Attached Dust Cover
REQUIRES: Cutting a hole to mount external socket.
Cementing the housing in the hole using CA or epoxy glue.
SPECS: Mounting Hole For External Socket: 11/16"
Wire Length: 23-1/2"
COMMENTS: Difference between standard and recessed ignitors:
"remote safety ignitor" glow plug wire has a loop with another wire
crossing through it. Looks kind of like this: @
"remote safety ignitor for recessed glo-plugs" glow plug wire has
two wires in a opposing V shape. Looks kind of like this: ><