Castle Creations 1/8 Mamba Monster 2/Neu-Castle 2650kV

Tower Stock# LXDAVK  •  Manufacturer Stock# 010-0108-02
Castle Creations 1/8 Mamba Monster 2/Neu-Castle 2650kV (large view)
Easy Pay
Request 3 Payments ($66.67, $66.66, $66.66) Details
Regularly Purchased Together
Although customers also purchased these, compatibility is not guaranteed. Click an item for product details.

Notes from our tech department:
This is the Mamba Monster 2 25V Electronic Speed Control
and the Neu Castle 1512 1Y 2650kV Motor, from Castle Creations.


Neu Castle 2650kV Brushless Motor;
High quality oversized ABEC-1 front and rear ball bearings
Sintered Neodymium magnets
6.5mm gold connectors with 10 gauge wires (OK to shorten)
Mamba Monster 2 25V ESC;
Compatible with on-road vehicles and buggies, running up to 4S LiPo
batteries and weighing up to 9lbs (4.0kg)
Waterproof design allows running in nearly any environment (see
Profiles can be custom designed on a PC with the Castle Link
PC programming software (software not included, can be
downloaded for free from Castle's website, voucher is included for
free Castle Link Programmer)
Solder posts allow battery wire length and direction to be easily
One year limited warranty through Castle Creations beginning at date
of purchase. Warranty does not cover abuse, neglect, or damage due
to incorrect wiring, over voltage or overloading


Mamba Monster 2 25V ESC with Cooling Fan, On/Off Switch, Fan Plug,
Motor Wires, Receiver Wire with Connector and Instructions
2650KV Neu Castle Brushless Motor with 10 Gauge Leads, Connectors
and Instructions
Voucher for free Castle Link Programmer


Input Voltage: 2S-6S LiPo
BEC: User selectable output between 5 and 7 volts
Brake: Proportional
Revesible: Yes, with lockout
Dimensions: 1.86 x 2.19 x 1.33" (47 x 56 x 34mm)
Weight: 3.93oz (111.5g) without battery connector
Motor, CSEC0500
Max Input Volts: 16.8
Amp Rating: 120
Weight: 13.1oz (370g)
Motor Diameter: 1.57" (39.98mm)
1.64" (41.78mm) with fins
Motor Length: 2.7" (68mm)
Shaft Diameter: 0.197" (5mm)
Ball Bearings: Oversize ABEC-1 front and rear
Connector: 6.5mm gold


Not intended for use while submerged in liquid. Fan on ESC is not
water resistant. Remove fan from ESC before exposing vehicle to

jxs 01/28/13

‐ Mailing Address ‐
‐ Additional Contact Information ‐