Traxxas 1/10 Nitro Slash 2WD 2.4GHz RTR

Tower Stock# LXDAYB**  •  Manufacturer Stock# 44054
Traxxas 1/10 Nitro Slash 2WD 2.4GHz RTR (large view)
Shipping Restricted ItemDetails
Notes from our tech department:
This is the Glow Powered, 2.4GHz Radio Controlled, Ready to Run, 1/10 Scale
Nitro Slash Short Course Racing Truck from Traxxas.

**The included TQ 2.4GHz radio system is compatible only with the**
**#6519 receiver and does NOT accept the Docking Base accessory.**

FEATURES

Chassis: 0.098" (2.5mm) thick 6061-T6 aluminum
Drive: Two wheel shaft drive with heavy duty telescoping driveshafts
Engine: TRX 3.3 with EZ-Start electric starter, slide valve
carburetor, dual stage foam air filter, and tuned pipe
Radio: 2.4GHz TQ 2-channel with high torque steering and throttle
servos
Receiver Box: Enclosed for protection from dust and debris
Transmission: Magnum 281 with metal top gear and idler gear,
adjustable slipper clutch
Fuel Tank: 5oz (150cc)
Shocks: X-Tra long high volume, oil filled Ultra shocks
Differential: Planetary type with steel gears
Body: Officially licensed Race Replica trimmed and painted
Bumpers: Front and rear flexible plastic
Steering: Bellcrank type with servo saver
Caster: Adjustable caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Brake: Steel discs with semi-metallic pads
Starter Battery: Traxxas 1500mAh NiMH Power Cell with Standard
connector
Battery Charger: 110V AC wall type
Tires: 2.2" (56mm) Licensed BF Goodrich Mud Terrain T/A, S1 rubber
compound with inserts
Wheels: Five spoke, bead lock look, 2.2" (56mm) outer diameter, 3.0"
(76mm) inner diameter, black in color

INCLUDES

RTR Nitro Slash SC Truck with TQ 2.4GHz 2-ch Radio, Engine with
Electric Starter, Starter Battery, Charger, Painted Body, extra
Glow Plug, Fuel Bottle, Nitro Tuning DVD, and Instruction Manual

REQUIREMENTS

Fuel: 10%-20% nitro content, 20% recommended for break-in
AA Batteries: Eight, four for transmitter and four for receiver
Track and maintenance equipment

SPECIFICATIONS

Vehicle-
Length: 22.24" (565mm)
Height: 7.40" (188mm)
Front and Rear Track: 11.65" (296mm) distance from outer edges of
tires, side-to-side
Wheelbase: 13.07" (332mm)
Gear Ratio: 2.81
Body-
Length: 21.3" (542mm)
Width: 11.4" (289mm)
Height: 5.3" (135mm)

COMMENTS

Available in the following officially licensed Race Replica body
styles;
TRAD77LR Black/Red, Chad Hord Edition
TRAD77NW Orange/White, Robby Gordon Edition
TRAD77RL Red/Black, Mark Jenkins Edition
TRAD77SL Silver/Black, Rob MacCachren Edition

The ball bearings in the 2wd Traxxas Nitro Slash are rubber sealed.
Following are the stock numbers for the replacement bearings from
Traxxas and non-rubber sealed alternatives from Duratrax:
Qty. Size Location Qty. Bearing Set
4 5x11mm Fr Hubs 2 DTXC1547
4 5x11mm Rear Hubs 2 DTXC1547
2 5x11mm Clutch 2 DTXC1547
6 5x11mm Transmission 3 DTXC1547
2 5x8mm Transmission 1 DTXC1523
4 5x8mm Steering 2 DTXC1523

jxs 01/08/13
ir/jxs

Resources
Easy RC: Cars & Trucks
Manufacturer Mailing Address
Additional Manufacturer Contact Info