TrakPower LiPo 2S 7.4V 4600mAh 80C Hard Case 4mm Short

Tower Stock# LXDBUH  •  Manufacturer Stock# TKPC0505
TrakPower LiPo 2S 7.4V 4600mAh 80C Hard Case 4mm Short (large view)
Shipping Restricted ItemDetails
Shipping Note:Details
Product WarningDetails
Quantity Discounts Available
Save $8.76
3 for $186.21
Save $19.50
6 for $370.44
Save $42.84
12 for $737.04
Regularly Purchased Together
Although customers also purchased these, compatibility is not guaranteed. Click an item for product details.

Notes from our tech department:
This is the TrakPower 2S 7.4V 80C 4600mAh Hard Case Short LiPo Battery.


For electric on and off road cars, buggies and trucks
ROAR approved
Hard plastic case for protection against the elements and crash
4mm female bullet connectors for positive (+) and negative (-)
2mm terminal for balancing
Male connectors to solder to wire leads


2S 7.4V 80C 4600mAh Short LiPo Battery
Two 4mm Male Bullet Connectors
One 2mm Balance Connector
Instruction Sheet


LiPo compatible charger with balancer such as the Duratrax Onyx 235,
(DTXP4235) or the TrakPower VR-1 (TKPP5000)


Battery Type: Lithium Polymer
Cell Number: 2S
Rated Pack Voltage: 7.4V
Capacity: 4600mAh
Max Recommended Charge Current: 1C (4.6A)
Continuous Discharge: 80C (368 amps)
Pack Dimensions: 0.9 x 1.9 x 3.8" (24 x 47 x 95.8mm)
Weight: 7.6oz (215g)
Discharge Connectors: 4mm Bullet
Balance Connector: 2mm Bullet


ALWAYS use a LiPo-approved Charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.20V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the "To ESC or "DISCHARGE" lead
NEVER Trickle Charge
NEVER allow to Discharge below 2.5V per cell
NEVER disassemble or modify pack wiring in any way or puncture cells
NEVER place on combustible materials or leave unattended during
ALWAYS Charge in a fireproof location
ALWAYS set charger's output volts to match battery volts

jxs 06/11/13

See Tower Catalog page 143.
‐ Manufacturer's Web Page ‐
‐ Mailing Address ‐
‐ Additional Contact Information ‐