Novak Micro Pro Racing ESC

Tower Stock# LXDDLE  •  Manufacturer Stock# 1856
Novak Micro Pro Racing ESC (large view)
Notes from our tech department:
This is the Novak Micro Pro Electronic Speed Control for Brushless Motors.


Designed for 2WD and 4WD 1/18 to 1/14 scale setups using 2S LiPo
battery packs
Dynamic Timing Advance increases motor's RPM dynamically through the
throttle band for higher speeds
Novak Super Tuner Firmware has multiple on-board adjustable settings
for complete custom tuning such as;
Drive Tuning: Dynamic Timing Advance, RPM (Start/Final/Range),
Drive Fequency and Minimum Drive
Brake Tuning: Brake Frequency, Drag Brake, and Minimum Brake
Additional Tuning: Deadband, Reverse Disable, and LiPo Protection
Auto-detect LiPo battery protection circuitry detects battery
voltage and reduces power to protect batteries from going below
safe voltage
Five throttle profiles for numerous present and custom driving
Sensor-based for excellent torque and low-speed drivability
NovaBrakes provide instant braking under any condition
One-touch set up
Thermal overload protection
6V output for optional cooling fan or accessories such as running
User-replaceable input and switch harnesses, and motor sensor harness
Low-profile, cross-cut heat sink
Water resistant case


Novak Micro Pro ESC with 2mm bullet motor plugs and Instructions


Input Cells: 1*-2S LiPo, or 4-6 cell NiMH
*#5677 Booster Module required for 1S operation
Operation: Forward, Brake, Reverse
Size: 1.15 x 0.95 x 0.66" (29.0 x 24.3 x 16.8mm)
Weight: 0.69oz (19.5g)
On-Resistance: 0.0011 ohms @ 25C trans. temp
Motor Limit: any 380-size brushless
BEC: 6.0V DC, 2.0 amps
Wire Size: 16G super flex copper strand silicone wire
Motor Plugs: 2mm gold plated bullet plugs factory installed

jxs 04/23/13

‐ Mailing Address ‐
‐ Additional Contact Information ‐