HPI Racing 1/8 Savage X 4.6 Nitro 2.4 RTR

Tower Stock# LXDDNW**  •  Manufacturer Stock# 0
HPI Racing 1/8 Savage X 4.6 Nitro 2.4 RTR (large view)
Notes from our tech department:
This is the glow powered, 2.4GHz radio controlled 1/8 scale, ready to run,
Savage X 4.6 Monster Truck from HPI.

FEATURES

Chassis: Rigid 6061 series aluminum TVP (Twin Vertical Plate)
Drive: Four wheel shaft drive with heavy duty dogbones
Engine: HPI F4.6 with slide valve carburetor, ABC ("A"luminum piston
with a "B"rass sleeve that is "C"hrome plated), 8-port liner,
7.5mm slide valve composite body carburetor and dual stage air
filter
Exhaust: Composite construction tuned pipe, black in color
Clutch: Three shoe, heavy duty
Electric Starter: Roto Start 2 with starter shaft, 7.2V 2000mAh
battery pack and AC wall charger
Radio: 2.4GHz pistol grip with failsafe and waterproof servos
Transmitter is TF-40 3-Channel 2.4GHz FHSS (HPIL5381)
Receiver is RF-40 3-Channel 2.4GHz
Differentials: Planetary gear with aluminum alloy cases
Shocks: Four Big Bore, oil filled nylon body
Transmission: Two speed with adjustable shift points
Brake: Dual heat resistant fiber discs
Body: Painted and trimmed GT-3
Bumpers: Composite construction
Wheels: Black chrome Warlock 2.2" (56mm) wide, 3.3" (83mm) diameter
with 17mm hex
Tires: 3.4" (85.5mm) wide, 6.2" (159mm) diameter
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Steering: Bell crank
Throttle servo: SF-10W Servo (Waterproof/4.5kg-cm6.0V) (HPIM4105)
Steering servo: SF-20W Servo (Waterproof/6.6kg-cm6.0V) (HPIM4109)
Warranty: Two year limited through HPI beginning at date of purchase
valid only in USA, Canada and South America

INCLUDES

RTR Savage X 4.6 Monster Truck, .28 cu in (4.6cc) engine with
electric starter, NiMH starter battery, charger, glow starter, 8 AA
batteries, 4-way wrench, fuel bottle, extra glow plug, painted
body

REQUIREMENTS

Fuel: 2-cycle glow fuel with 20% nitromethane, 16% lubricant
Track equipment

SPECIFICATIONS

Vehicle-
Length: 21" (534mm)
Width: 16.8" (427mm)
Height: 10" (254mm)
Wheelbase: 13.24" (336.5mm)
Suspension Travel: 5.9" (152mm)
Body-
Length: 18" (457mm)
Width: 7" (178mm) at rear wheels, widest point
6-1/4" (158mm) behind from wheels, thinnest point
Height: 5" (127mm)

COMMENTS

Available in two color schemes;
Silver/Gun Metal Gray, HPID84SE
Silver/Black, HPID84SL

For Replacement Ball Bearings use:
Qty. Size Location Bearing Set Qty.
4 8x16x5 FR & R gearboxes 2 DTXC1585
3 10x16x5 FR, CTR & R Diffs 2 HPIC2032
5 6x13x5 CTR gearbox 3 DTXC1573
1 8x16x5 CTR gearbox 1 DTXC1585
2 5x10x4 Clutch 1 HPIC0021
4 8x16x5 FR uprights (wheels) 2 DTXC1585
4 8x16x5 R uprights (wheels) 2 DTXC1585

jxs 02/07/13
ir/jxs

Resources
Easy RC: Cars & Trucks
‐ Mailing Address ‐
‐ Additional Contact Information ‐