This is a Hitec servo that will work with all modern radio systems|
including Futaba J, Hitec, JR and Airtronics Z.
Heavy-duty resin gear train
3-pole ferrite motor
One Deluxe Standard servo with nylon bushing.
One white small X-shaped servo horn.
One white adjustable servo horn.
One white offset straight servo horn.
One red X-shaped heavy-duty servo horn.
Four brass eyelets.
One white plastic wheel servo horn.
Four black rubber vibration isolators.
Four M2x14 mounting screws
Universal Futaba J, S/JR/Airtronics Z plug compatible radio system
Speed: 0.19 sec/60° at 4.8V
Speed: 0.15 sec/60° at 6.0V
Torque: 42.00 oz-in at 4.8V
Torque: 51.00 oz-in at 6.0V
Length: 1.60" (41mm)
Width: 0.80" (20mm)
Height: 1.40" (37mm)
Weight: 1.5oz (43g)
Gear set: HRCM5002 ir/kh
Horn set: HRCM6315
NOTE: This is a non-ball bearing servo.
updated ldt 4/26/03
updated rda 8/21/06