HPI Racing Fuelie K26 Engine

Tower Stock# LXDFPV  •  Manufacturer Stock# 107940
HPI Racing Fuelie K26 Engine (large view)
Easy Pay
Request 3 Payments of $133.33 Details
Notes from our tech department:
This is the HPI Fuelie K26 1.6 cu in (26cc) Gasoline Engine used with the
Baja 5B, 5T and 5SC series.


Pull starter
Primer, choke and kill switch
Two stage foam air filter
Two year limited warranty, USA, Canada and South America only


HPI Fuelie K26 1.6 cu in (26cc) Gasoline Engine with NGK CMR 7H spark
plug, air filter housing with two foam filters, muffler, plug
wrench and instruction manual


Unleaded Gasoline: 87-93 octane, mix gasoline and two cycle oil
at 25:1 ratio
Pre mix 2 cycle oil


Carburetor Settings-IMPORTANT Do not adjust the carburetor before
break-in. The carburetor is set slightly rich from the factory.
If Top Speed is Slow-turn high-speed needle a maximum of 1/4 turn
from factory setting.
If vehicle accelerates slowly, turn the low-speed needle a maximum
of 1/4 turn clockwise from factory setting
Rotate high and low speed needles only a 1/16 of a turn at a time.
Do not make large adjustments.
Spark Plug Gap: 0.6-0.7mm
Displacement: 1.6 cu in (25.4cc)
Maximum Power: 2.7 horsepower @ 13,500RPM
Maximum Torque: 0.165/10500 kg.m/RPM
Maximum RPM at non-load: 22000 RPM
Weight: 4.5lbs (2.04kg)
Length: 6.2" (158mm)
Width: 11.2" (286mm)
Height: 7.8" (199mm)

jxs 11/20/13

Parts Compatibility
Easy RC: Engines
‐ Mailing Address ‐
‐ Additional Contact Information ‐