This is the Nitro Star .21 engine w/pullstart from HPI. It features full
    ball bearings and comes w/pre-installed engine mount for use with the
        HPI Savage truck. This is the stock engine for the HPI Savage.

FEATURES: ABC cylinder sleeve construction
          Fully adjustable dual needle 7mm slide carburetor
          Large aluminum heatsink head, Purple in color
          Convenient pullstarter

INCLUDES: One Nitro Star .21 engine.
          One air filter cage
          Two thick foam filter elements, pre-oiled
          Two thin foam filter elements, pre-oiled
          Two 6" zip ties
          One 1.5mm allen wrench, for adjusting throttle arm position
          One instruction booklet
          One decal sheet

REQUIRES: Fuel and starting equipment

SPECS:    Displacement:                                  3.44cc  (0.21 ci. in.)
          Weight, w/Savage mount:                      490 grams (17.28 ounces)
          Distance/cylinder head to bottom of mounting flanges:   3.86"  (98mm)
          Distance/top of cylinder head to bottom of crankcase:   4.41" (112mm)
          Crankcase mount hole spacing, front to rear:            0.83"  (21mm)
          Crankcase mount hole spacing, left to right:            1.46"  (37mm)
          Savage engine mount bolt hole spacing:  1.575"(40mm) x 1.807"  (46mm)

COMMENTS: Engine can be detached from included engine mount to allow for
           use with other nitro vehicles.
          Replacement pull-starter is HPIG1428.
          If engine mount to chassis screws are needed, use HPIC2792
          The Nitro Star has the same mounting dimensions as the
           OS 21RG-X(P).
                                                                    NNA 2/11/03
                                                                         ir/jxs