Associated 1/10 RC10B4.2 2WD RTR Red/White

Free RPM Monster Camber Gauge
Tower Stock# LWL108RW  •  Manufacturer Stock# 9042
Associated 1/10 RC10B4.2 2WD RTR Red/White (large view)
Easy Pay
Request 3 Payments of $83.33 Details
Color Availability
Money Saving Combos
Notes from our tech department:
This is the 1/10 scale electric powered, 2.4GHz radio controlled,
ready to run, Associated RC10B4.2 (Race Spec) off-road Buggy.

FEATURES

Chassis: Molded composite tub type with composite battery strap that
fits NiCd/NiMH or LiPo packs
Drive: Two wheel
Transmission: One speed, ball bearing equipped
Radio: Associated XP2G 2-channel IFHss 2.4GHz with DS1903 metal
gear servo
ESC: XP SC500-BL brushless, water resistant, LiPo cutoff and T-plug
battery connector
Motor: 540 size Reedy 3300kV brushless
Ball Bearings: Full set, 14 rubber sealed
Shocks: Blue anodized aluminum body V2, oil-filled
Shock Towers: Composite plastic, black in color
Motor Mount: Plastic
Differential: Sealed gear diff with adjustable slipper clutch
Spur Gear: Plastic, 81 tooth, 48 pitch
Wheels: Plastic white dish type front, 1.02" (26mm) wide, 2.2"
(56mm) diameter, rear 1.5" (38mm) wide, 2.2" (56mm) diameter
Wheel Hexes: 12mm
Body: Trimmed and painted Interceptor 2.0
Caster: Adjustable with steel turnbuckles, caster/toe-in refers to
the angle of the front suspension when viewed from the side of the
car in relation to the chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Steering: Bellcrank type with servo saver

INCLUDES

RTR Associated RC10B4.2 off-road Buggy, 2.4GHz Radio, Brushless Motor
ESC, painted Body, Decals and Instructions

REQUIREMENTS

AA Batteries: 6 for transmitter
Battery: 6-cell stick pack with Deans connector, or 2S LiPo battery
Battery Charger: To match selected battery
Maintenance and track equipment

SPECIFICATIONS

Vehicle;
Length: 14.8" (377mm)
Width: 9.8" (250mm)
Weight: 3.4lbs (1530g) running weight will vary depending on
battery
Wheelbase: 10.7" (273mm)
Internal Gear Ratio: 2.6:1
Body:
Length: 10.9" (277mm)
Width: 6.2" (158mm)
Height: 2.3" (58mm)

COMMENTS

Available in the following body colors;
Blue/Yellow, ASCD93BY
Red/White, ASCD93RW

For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
4 3/16x3/8" Transmission 2 DTXC1423
2 10x16mm Transmission 1 ASCC9832
4 3/16x3/8" Rear Hubs 1 DTXC1423
4 3/16x3/8" Front Hubs 1 DTXC1423

jxs 06/17/13
ir/jxs

Resources
See Tower Catalog page 81.
Easy RC: Cars & Trucks
‐ Mailing Address ‐
‐ Additional Contact Information ‐