Hitec X1-200 Touch Battery Charger

Tower Stock# LXDUCF  •  Manufacturer Stock# 44209
Hitec X1-200 Touch Battery Charger (large view)
Notes from our tech department:
This is the DC Powered
Hitec X1-200 Battery Charger, Discharger, and Balancer.


Charges 1-6 cell LiPo, 1-6 cell LiFe, 1-6 cell Li-Ion, 1-15 cell
NiMH, and 2-20V Pb (lead acid) cells
3.2" LCD touch screen
Individual LiPo cell voltage balancer with universal balancing
board compatible with most LiPo batteries
Fast and storage mode for lithium charging
Cyclic charging and discharging for NiMH and NiCd cells may be set to
repeat 1-5 times
Delta peak sensitivity for NiMH and NiCd cells
Temperature threshold shutdown for NiCd and NiMH cells (requires
Temperature Sensor, HRCP4159-not included)
Operates on a 12V automotive battery or 11-18V DC power supply
Automatic current adjustment during charging and discharging
One year limited warranty through Hitec beginning at date of purchase


X1-200 Touch Charger, DC Power Cord with Alligator Clips, 2 Pin
T-Type Charging Cable, Balancing Board Cable, Universal Balancing
Board, and Instruction Manual


Input Voltage Range: DC 11-18V DC
Required Input Amperage: 12 Amps
Max Charge Power: 200 Watts
Charge Current Range: 0.1-12 Amps
Discharge Circuit Power: 40 Watts
Discharge Current Range: 0.1-5.0 Amps
Balancing Port Current Drain: 200mA per cell
NiCd, NiMH Cell Count: 1-15 cells
LiPo, LiFe & Li-Ion Cell Count: 1-6 cells
Lead Acid (Pb) Voltage: 2-20 Volts
Weight: 1.25 lbs (35.4g)
Dimensions: 5.5 x 6.5 x 2.4" (140 x 165 x 61mm)

jxs 08/26/13

‐ Mailing Address ‐
‐ Additional Contact Information ‐