Associated 1/10 SC10 RS Toyota Racing RTR

Tower Stock# LXDUCX  •  Manufacturer Stock# 7054
Associated 1/10 SC10 RS Toyota Racing RTR (large view)
Shipping Restricted ItemDetails
Notes from our tech department:
This is the electric powered, 2.4GHz radio controlled, 1/10 scale, ready to run
SC10 RS (Race Spec) Short Course Race Truck
with Toyota Racing Body Trim from Team Associated.


Chassis: Molded composite low CG design with side nerf bars,
hinged battery hold down strap fits NiMH and LiPo battery packs
Drive: Rear wheel with steel rear dogbone drive shafts
Motor: Associated Reedy 3300kV brushless
Radio: Associated XP2G 2.4GHz 3-channel system with the DS1903 metal
gear steering servo
ESC: Associated XP SC600-BL brushless compatible with LiPo cutoff
Shocks: V2 oil-filled with blue aluminum bodies
Body: 0.040" (1mm) thick painted and trimmed with Toyota Racing Body
Trim Scheme
Differential: Sealed, planetary gear
Spur Gear: 87 tooth
Slipper Clutch: Dual sided, externally adjustable
Receiver Box: Enclosed water resistant design
Battery Strap: Composite hold down strap fits NiMH and LiPo battery
Wheels: KMC style, 3" (76mm) diameter, 1.6" (41mm) wide, black in
Tires: Multi terrain scale with reinforced sidewalls, 4.25" (108mm)
diameter, 1.7" (43mm) wide
Caster: Adjustable, caster/toe-in refers to the angle of the
suspension when viewed from the side of the car in relation to the
chassis, includes Factory Team Arm Mounts (ASCC7487) that allow
four choices of rear toe-in for different track conditions
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Bumpers: Front and rear with functional rear rubber mud flaps
Ball Bearings: 14 rubber sealed
Suspension: Fully adjustable with steel turnbuckles
Steering: Angled bellcrank "coplanar" steering with integral servo


SC10 RS Short Course Race Truck from Associated with tires, wheels,
ESC, painted body, brushless motor, 2.4GHz radio, instruction

REQUIRES Transmitter Batteries: Six AA-size
Battery: 2S LiPo with Deans connector or 6-cell NiMH stick pack
Battery Charger: To match selected battery
Building and track equipment


Length: 21.6" (550mm)
Width: 11.5" (293mm)
Track: 9.6" (245mm)
Weight: 4.6lbs (2080g)
Wheelbase: 12.9" (327mm)
Internal Gear Ratio: 2.6:1
Length 21.6" (550mm)
Width 11.5" (293mm) at front fenders, widest point
8.8" (224mm) at center section, narrowest point
Height: 6" (153mm)


For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 6x10mm Transmission 1 DTXC1561
2 3/16 x 3/8" Transmission 1 DTXC1423
2 3/16 x 3/8" Idler Gear 1 DTXC1423
4 3/16 x 3/8" Rear Hubs 2 DTXC1423
4 3/16 x 3/8" Front Hubs 2 DTXC1423

jxs 07/11/13

See Tower Catalog page 82.
Easy RC: Cars & Trucks
‐ Mailing Address ‐
‐ Additional Contact Information ‐