Thunder Power RC AC/DC Charger/Discharger/Cycler w/Bala

Tower Stock# LXDUKS  •  Manufacturer Stock# TP610C-ACDC
Thunder Power RC AC/DC Charger/Discharger/Cycler w/Bala (large view)
Shipping Restricted ItemDetails
Notes from our tech department:
This is the Thunder Power TP610C AC/DC Powered,
Battery Charger, Discharger and Cycler.

FEATURES

Charges 1-6 cell LiPo/LiIon/LiFe, 1-14 cell NiCd/NiMH, and 6-12V Pb
lead acid cells
Built-in balancer for LiPo/LiIon/LiFe (A123) cells with two balance
boards for 2-8S Thunder Power and JST-XH balance connectors
Backlit LCD screen designed to prevent permanent fading when used in
high-temp environments
Selectable charge rates from 0.1-10amps
50% Storage, 95%, 100%, and Competition Car Mode charge voltages for
LiPo/LiIon/LiFe (A123) batteries
25 user programmable memory slots for easy recall of cell counts, and
charge/discharge rates for commonly used batteries
Dual computer controlled cooling fans
Firmware updatable using PGM V2
Aluminum case
Contact Thunder Power RC for specific warranty information

INCLUDES

TP610C AC/DC Powered, Charger, Discharger and Cycler, Thunder Power,
and JST-XH Balance Boards, 110V Power Cord, Instruction Manual,
Wire Lead with Bullet Connectors and Pretinned Leads

SPECIFICATIONS

Voltage Input: 100-240V AC or 11-18V DC
Charge Rate: Adjustable from 0.2-20A per port
Charge Current: 0.1-10 amps in 0.05 amp increments (80W max.)
Charge Voltage: 50% Storage, 95%, 100%, and Competition Car Mode
charge voltages for LiPo/LiIon/LiFe (A123) batteries, adjustable
delta peak sensitivity for NiCd/NiMH and top off for Pb (lead
acid)
Discharge Current: 0.1-1 amps in 0.05 amp increments (8W max.)
Cycles: 1-9 times with data stored for all cycles
Memories: 25 user programmable per chemistry
Balancer: Integrated for 2-6S LiPo/LiIon/LiFe (A123) with balance
connector adapter board for Thunder Power and JST-XH connectors
Firmware: User updatable using PGM-V2

jxs 09/24/13
ir/jxs

Resources
‐ Mailing Address ‐
‐ Additional Contact Information ‐