Dromida 1/18 MT4.18 Monster Truck 4WD RTR

Tower Stock# LXDVBX  •  Manufacturer Stock# DIDC0042
Dromida 1/18 MT4.18 Monster Truck 4WD RTR (large view)
Regularly Purchased Together
Although customers also purchased these, compatibility is not guaranteed. Click an item for product details.

Notes from our tech department:
This is the Electric Powered, Radio Controlled, 1/18 Scale
RTR MT4.18 Monster Truck from Dromida.

**This version was replaced by the DIDC0048**

FEATURES

Chassis: Plastic tub
Drive: Four wheel, shaft driven
Motor: M370 super high-speed brushed
Radio: 2-channel 2.4GHz radio system with trims and dual rates, and
2-in-1 waterproof ESC/receiver, waterproof steering servo
Battery: 7.2V 1300mAh NiMH
Battery Charger: AC wall type
Differentials: Gear type
Suspension: Fully adjustable independent
Shocks: Oil-filled big bore composite body, with multiple mounting
locations
Bumpers: Flexible plastic, front and rear
Ball Bearings: Full set
Body: Printed and trimmed
Tires and Wheels: Rubber tires with offroad tread, gray plastic
wheels, width: 1.2" (29.5mm), outer diameter 2.5" (65mm), hex size
0.31" (8mm)
Caster: Non-adjustable, caster/toe-in refers to the angle of the
front suspension when viewed from the side of the car in
relation to the chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Warranty: Ninety day limited beginning at date of purchase

INCLUDES

RTR MT4.18 Monster Truck with 2.4GHz Radio, Brushed Motor,
Printed Body, four AA Batteries, 7.2V Battery, AC Wall Charger,
Instructions

SPECIFICATIONS

Vehicle;
Length: 10.6" (270mm)
Width: 7.5" (190mm)
Height: 4.3" (110mm)
Gear Ratio: 10.4:1
Body;
Length: 9.8" (250mm)
Width: 3.7" (95mm)
Height: 2.5" (65mm)

COMMENTS

For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 8x12mm Fr Diff 1 DTXC1581
2 8x12mm Rear Diff 1 DTXC1581
2 6x10mm Driveshaft 1 DTXC1561
1 8x12mm Driveshaft 1 DTXC1581
4 8x12mm Front Uprights 2 DTXC1581
4 8x12mm Rear Uprights 2 DTXC1581

For increased speed Dromida offers a Brushless Conversion Kit
(DIDC1150) that includes a Brushless Motor, 25A ESC and other
upgraded components. The Dromida 2S 7.4V 1600mAh Battery
(DIDC1134) is recommended for best results and highest speed with
this conversion kit.
**Do NOT use LiPo battery with stock ESC. The stock ESC does not have
Low Voltage Cutoff, and will damage the LiPo battery.

jxs 09/25/13
ir/jxs

Resources
Easy RC: Cars & Trucks
Review #1
Review #2
Review #3
‐ Manufacturer's Web Page ‐
‐ Mailing Address ‐
‐ Additional Contact Information ‐