Dromida 1/18 MT4.18 Monster Truck 4WD RTR

Tower Stock# LXDVBX  •  Manufacturer Stock# DIDC0042
Dromida 1/18 MT4.18 Monster Truck 4WD RTR (large view)
Notes from our tech department:
This is the Electric Powered, Radio Controlled, 1/18 Scale
RTR MT4.18 Monster Truck from Dromida.


Chassis: Plastic tub
Drive: Four wheel, shaft driven
Motor: M370 super high-speed brushed
Radio: 2-channel 2.4GHz radio system with trims and dual rates, and
2-in-1 waterproof ESC/receiver, waterproof steering servo
Battery: 7.2V 1300mAh NiMH
Battery Charger: AC wall type
Differentials: Gear type
Suspension: Fully adjustable independent
Shocks: Oil-filled big bore composite body, with multiple mounting
Bumpers: Flexible plastic, front and rear
Ball Bearings: Full set
Body: Printed and trimmed
Tires and Wheels: Rubber tires with offroad tread, gray plastic
wheels, width: 1.2" (29.5mm), outer diameter 2.5" (65mm), hex size
0.31" (8mm)
Caster: Non-adjustable, caster/toe-in refers to the angle of the
front suspension when viewed from the side of the car in
relation to the chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Warranty: Ninety day limited beginning at date of purchase


RTR MT4.18 Monster Truck with 2.4GHz Radio, Brushed Motor,
Printed Body, four AA Batteries, 7.2V Battery, AC Wall Charger,


Length: 10.6" (270mm)
Width: 7.5" (190mm)
Height: 4.3" (110mm)
Gear Ratio: 10.4:1
Length: 9.8" (250mm)
Width: 3.7" (95mm)
Height: 2.5" (65mm)


For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 8x12mm Fr Diff 1 DTXC1581
2 8x12mm Rear Diff 1 DTXC1581
2 6x10mm Driveshaft 1 DTXC1561
1 8x12mm Driveshaft 1 DTXC1581
4 8x12mm Front Uprights 2 DTXC1581
4 8x12mm Rear Uprights 2 DTXC1581

For increased speed Dromida offers a Brushless Conversion Kit
(DIDC1150) that includes a Brushless Motor, 25A ESC and other
upgraded components. The Dromida 2S 7.4V 1600mAh Battery
(DIDC1134) is recommended for best results and highest speed with
this conversion kit.
**Do NOT use LiPo battery with stock ESC. The stock ESC does not have
Low Voltage Cutoff, and will damage the LiPo battery.

jxs 09/25/13

Easy RC: Cars & Trucks
Review #1
Review #2
Review #3
‐ Manufacturer's Web Page ‐
‐ Mailing Address ‐
‐ Additional Contact Information ‐