This is the Top Flite Glow Powered, Almost Ready-to-Fly,|
Flite Streak Control Line Profile Model Airplane.
Perfect for training, stunt flying, or exciting combat fun.
Suitable for ages 14 and older.
Construction: Balsa and plywood
Wings: One-piece, built up balsa, shoulder mount
Fuselage: Wooden profile type
Covering: Factory applied adhesive backed Top Flite MonoKote, color
scheme is Black on the forward section of the wing and fuselage,
with White and Red on the wing and Red on the upper rear section
of the fuselage and tail section
Canopy: Brown tinted single canopy
Landing Gear: .12" (3mm) fixed wire with one 1¾" (44mm) foam wheel
Building Time: Ready to fly in only 2-3 hours, bellcrank and leadouts
Warranty Period: Top Flite Models guarantees this kit free of defects
Warranty does not cover any part damaged by use or modification.
One Flite Streak Control Line profile model airplane by Top Flite
decal sheet, metal fuel tank, hardware bag, elevator pushrod,
1¾" (44mm) foam wheel, landing gear wire, photo-illustrated
Engine: .25-.40 cu in (4.1-6.5cc) 2-stroke, control line type
An R/C engine can be used if the carburetor arm is held in the full
throttle position with some type of linkage (not supplied)
Muffler: Stock muffler supplied with engine
Misc. Items: medium fuel tubing, propeller, safety nut, fuel filter
filter, building and field equipment, control line, handle, and
Wingspan: 41.5" (1055mm)
Wing Area: 398 sq in (26 sq dm)
Wing Loading: 8.8oz/sq ft (25 g/sq dm)
Weight: 24-26oz (680-737g)
Length: 27" (685mm)
Airfoil: Fully symmetrical
Elevator Control Throw: 3/8" (10mm) up and down
Center of Gravity: 3¼" (82.6mm) Back from the wing's leading edge
at the fuselage side
Following are the Top Flite MonoKote colors used to cover this model
and order numbers for six foot rolls.