Mugen Seiki 1/8 MBX-7 Eco M-Spec Kit

Tower Stock# LXDVGV  •  Manufacturer Stock# E2010
Mugen Seiki 1/8 MBX-7 Eco M-Spec Kit (large view)
Notes from our tech department:
This is the electric powered, radio controlled, 1/8 scale
Mugen MBX7-ECO M-Spec Off Road Buggy Kit.

FEATURES

Chassis: A7075 T6 aluminum 0.12" (3mm) thick
Drive: Four wheel three differential shaft drive
Shocks: Four oil filled
Shock Towers: Front, 0.20" (5mm) thick 7075 aluminum
Rear, 0.16" (4mm) thick 7075 aluminum
Gearbox: Sealed, front and rear
Differentials: Planetary geared
Motor Mount: Two piece
Transmission: Single-speed
Ball Bearings: Full set
Battery Tray: Designed for two 2 cell LiPo batteries or a single 4
cell LiPo battery
Suspension: Pillow ball type with 0.20" (5mm) aluminum lower
suspension mounts for optimized geometry
Body: Clear buggy type, cab forward design with raised sides for
increased rear traction
Spur Gear: 44 Tooth plastic
Pinion Gear: 14T steel
Camber Tie Rods: Adjustable, Camber describes the angle at which the
tires sit vertically
Steering Tie Rods: Adjustable, Caster/Toe-in is the angle at which
the tires point inward as viewed from above
Steering: Bell-crank type, with carbon graphite steering brace and
adjustable Ackerman. Ackerman describes the effect of the inside
front wheel turning faster than the outside front wheel during
turns

INCLUDES

Mugen MBX7-ECO M-Spec Off Road Buggy Kit with clear buggy body,
rear wing, decal sheet, window mask sheet, battery/ESC tray, spur
and pinion gears, and illustrated instrucion manual

REQUIREMENTS

Motor: 1/8 scale brushless motor
ESC: 1/8 scale brushless motor compatible ESC
Radio: 2-channel with high-torque servo for steering
Tires, Foam Inserts, and Wheels: 1/8 scale buggy
Building and track equipment

SPECIFICATIONS

Vehicle
Specs such as dimensions, weight, and wheelbase were not provided by
manufacturer at the time of this writing
Body-
Length: 13" (330mm)
Width: 7.9" (200mm)
Height: 3.6" (92mm)

COMMENTS

For replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
6 8x16mm Fr/R/Center Diffs 3 DTXC1585
4 8x16mm Fr/R Gear Cases 2 DTXC1585
2 8x16mm Front Hubs 1 DTXC1585
2 15x21mm Front Hubs 1 ASCC6862
2 8x16mm Rear Hubs 1 DTXC1585
2 15x21mm Rear Hubs 1 ASCC6862

jxs 08/16/13
ir/jxs

Resources
Easy RC: Cars & Trucks
‐ Mailing Address ‐
‐ Additional Contact Information ‐