LRP Pulsar Touch Competition Charger

Tower Stock# LXDYES  •  Manufacturer Stock# 41556
LRP Pulsar Touch Competition Charger (large view)
Notes from our tech department:
This is the LRP Pulsar Touch DC Powered Competition Charger,
Discharger and Balancer from LRP America.


Charges 1-4 cell LiPo/LiFePo with automatic (LiPo/LiFePo) cut-off,
and 1-8 cells (NiMH/NiCd) with adjustable Delta-Peak detection,
linear or optional 5-step charge mode, charges with variable
current steps
Integrated LiPo/LiFePo balancer
Blue backlit touch-screen graphics display
Intuitive program structure with graphical user interface, allows
precise adjustment of all parameters
Adjustable discharge current and cut-off voltage
User Profile Memory, 5 factory pre-set profiles can be customized,
re-named and saved in memory
Receiver simulator port for checking speed controls and servos
USB connection with wire for data download to PC and firmware update
Brushless motor sensor port for sensor check and RPM measurement
Protection against output reverse polarity, short circuit, input
voltage error and over charge


LRP Pulsar Touch Charger with DC Input Cable with 4mm Male Connectors
USB Cable, Output Cable with 4mm Male Connectors and Alligator
Clips, and Instruction Manual


12V power supply


Dimensions: 6.2 x 6.8 x 2.7" (158 x 172 x 68mm)
Weight: 25.4oz (720g)
DC Input Voltage: 11-15V
Integrated LiPo Balancer: 2S - 4S
Charging Mode: Linear, 4 step, LiPo LiFePo
Charging Capacity: NiMH/NiCd 1-8 cell
LiPo LiFePo 1-4 cell
Charge Current: 0.1 - 12A
Trickle Current: 0 - 0.55A
Delta Peak: 1-200mV
Autostart Timer: 0-99 min.
Storage Charge and Cycle Modes: Yes
Discharge Current: 0.1 - 20.0A 35A pulse
Discharge Cut-Off Voltage: NiMH/NiCd 0.1 -1.3V/cell
LiPo/ LiFePo 2.0 - 4.2V/cell
Internal Cooling Fans: Two
Acoustic Signal: Buzzer
Voltage Calibration Mode: Yes
Multi Protection System: Yes
DC Input Connection: 4mm connectors
Output Connection: 4mm jacket with alligator clips


For the Multi Balance Adapter, order LRPP2103

jxs 10/15/10
updt jxs 02/06/13

‐ Mailing Address ‐
‐ Additional Contact Information ‐