Tactic AnyLink2 SLT Universal Radio Adapter

Tower Stock# LXDZRS  •  Manufacturer Stock# TACJ2005
Tactic AnyLink2 SLT Universal Radio Adapter (large view)
Shipping Restricted ItemDetails
Shipping Note:Details
Product WarningDetails
Notes from our tech department:
This is the Tactic AnyLink2 2.4GHz Radio Adapter.

**Not compatible with the Futaba 7C 2.4GHz Radio Systems.**


Transforms aircraft transmitter into a frequency-hopping, spread-
spectrum system using SLT (Secure Link Technology)
Compatible with most aircraft transmitters with a functioning trainer
jack, including Airtronics, even non-2.4GHz transmitters
Transmitter Compatibility Chart;
Enables transmitter to fly all Tx-R (Transmitter Ready) aircraft, and
any aircraft with a 2.4GHz SLT receiver, including huge scale
aircraft, park flyers, and helis using glow, electric, or gasoline
Easy mapping, just push MODE button until LED appears opposite the
letter code for user's radio
Three adapter cables equipped with headphone-type connectors for
easy plug-in installation
One year limited warranty beginning at date of purchase. This
warranty does not cover damage caused by abuse, misuse, alteration,
or accident


AnyLink2 2.4GHz Radio Adapter
1S 3.7V 450mAh LiPo battery, TACP0011
Cable A, JR, Spektrum, Graupner, TACM0010
Cable B, Futaba Square, TACM0011
Cable C, Spektrum, Hitec, TACM0012
TC10 USB Charger, TACP0010
Two Hard Locking Adhesive Strips
Instruction Sheet


Charging battery with included USB charger before use
Aircraft transmitter with DSC or trainer jack


Compatible Receivers: Tactic 2.4GHz, Tx-R aircraft, receivers having
SLT protocol
Frequencies: 2.403-2.479GHz
Modulation: FHSS spread spectrum
Flight Range: Full range
Input Power: 3.30 - 4.20V, 25mA
Power Control: Automatic with incoming signal recognition
Power On Indicator: Red LEDs with audible tones
Low Voltage Alarm: Audible tones at 3.25V
Inactivity Alarm: Tones sound after 5 minutes of transmitter activity
Output Power: < 0.1W
Case Dimensions: 2.68 x 1.46 x 0.98" (68 x 37 x 25mm)
Weight: 1.62oz (46g)


Adapter cables for the original AnyLink and the AnyLink2 are not
cross compatible.
AnyLink2 is only compatible with SLT receivers such as those from

jxs 12/31/13
updt jxs 01/25/16

See Tower Catalog page 168.
Manufacturer Mailing Address
Additional Manufacturer Contact Info