Axial 1/10 SCX10 2012 Jeep Wrangler C/R 4WD RTR

Tower Stock# LXEAVT  •  Manufacturer Stock# AX90035
Axial 1/10 SCX10 2012 Jeep Wrangler C/R 4WD RTR (large view)
Notes from our tech department:
This is the Electric Powered, 2.4GHz Radio Controlled, 1/10 scale
Ready to Run SCX10 Jeep® Wrangler Unlimited Rubicon from Axial.

Jeep and related logos, vehicle model names and trade dresses
are trademarks of Chrysler Group LLC and are used under
license by Axial R/C Inc. © Chrysler Group LLC 2014.


Chassis: Scale steel C-channel with cross bracing for reinforcement
and assembled with hex hardware, tapered for increased
Drive: 4 wheel shaft with WB8 wild boar driveshafts and full metal to
metal construction in the constant velocity joint design
Diff Locker: One-piece sintered metal construction reduces slop in
drive train by eliminating cross pin
Radio: AX-3 2-channel 2.4GHz 2-channel with high torque 151 oz/in
Tactic TSX45 metal gear steering servo, sealed receiver box
ESC: AE-2 LiPo compatible with forward, reverse and drag brake
Motor: 27T brushed motor, compatible with any 540 size motor
Pinion Gear: 48 pitch, 20 tooth
LED Lights: Three scale "E-Series" light bars and two duallys with
one LED each, 3-port LED controller
Shocks: Oil filled dual rate with realistic looking non-functional
coilover shock reservoir, plastic body
Transmission: Designed to place motor weight as low as possible
to maintain a low CG, adjustable ratio from 15:1 - 74:1, slipper
clutch allows transmission to slip in hard binds
with Poison Spyder crusher flares around the wheel wells to help
protect body from damage, and rear bumper spare tire carrier
Wheels: CRC edition Black Rock

Tires: Officially licensed BF Goodrich Krawler T/A, R35 compound

Rear Suspension: 4-link optimized to reduce axle steer and torque
Bumpers: Poison Spyder Rock Brawler with functional D-Rings and
mounting holes for LED lights, swing out tire carrier on rear
bumper, two hooks for connecting D rings and two holes for LED
lights (LED lights not included, optional Simple LED Controller
sold separately, AXIC2425)


RTR SCX10 Jeep® Wrangler, 2-ch 2.4GHz radio, ESC, 27T Motor,
Instruction Manual, decal sheet


Transmitter Batteries: Four AA size
Battery: 7.2V NiMH 6-cell stick pack or 7.4V 2S LiPo pack
Battery Charger: Compatible with selected battery
Track equipment


Length: 21.25" (540mm)
Width: 9" (229mm)
Height: 9" (229mm)
Wheelbase: 12.3" (313mm)
Ground Clearance: 2.7" (68mm)
Weight: 4.65lb (2.1kg)
Length: 17" (432mm)
Width: 7.7" (196mm)
Height: 5.5" (140mm)


For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 5x11mm Fr Dogbones 1 DTXC1547
2 10x15mm Fr Dogbones 1 DTXC1595
2 5x11mm Front Axle 1 DTXC1547
2 5x11mm Fr Hubs 1 DTXC1547
2 10x15mm Fr Hubs 1 DTXC1595
2 5x11mm Rear Dogbones 1 DTXC1547
2 10x15mm Rear Dogbones 1 DTXC1595
2 5x11mm Rear Axle 1 DTXC1547
4 5x10mm Transmission 1 DTXC1535
2 8x16mm Transmission 1 DTXC1585

jxs 12/09/13

See Tower Catalog page 87.
Easy RC: Cars & Trucks
‐ Manufacturer's Web Page ‐
‐ Mailing Address ‐
‐ Additional Contact Information ‐