Associated 1/10 RC10B5 2WD Team Kit

Tower Stock# LXEBSC  •  Manufacturer Stock# 90001
Associated 1/10 RC10B5 2WD Team Kit (large view)
Notes from our tech department:
This is the 1/10 scale Electric Powered, Radio Controlled,
Team Associated RC10B5 Team Buggy Kit.


Chassis: Narrow composite tub type, fits ROAR approved 2S LiPo packs
in saddle, short, and square configurations
Drive: Rear wheel
Transmission: New design has ball bearings, stronger gears, VTS
slipper clutch
Differential: 14 carbide ball type with lightweight outdrives
Body: B5 clear
Shocks: Factory Team V2 12mm Big Bore hard anodized aluminum, 3mm
shafts, and updated O-rings for improved smoothness
Front Suspension: Heavy duty steering and caster blocks, with insert
system for easy caster and trailing axle adjustments, adjustable
mount angle kick-up options of 25 and 30, heavy-duty lubricated
ball cups, and optimized ball studs for maximum suspension travel
without binding
Steering: Full ball bearing with horizontal ball studs for finer
Ackermann adjustments, Ackermann describes the effect of the inner
front wheel turning faster that the outer front wheel during turns
Wheels: Plastic white dish type front, 0.94" (24mm) wide, 2.4"
(61mm) diameter, rear 1.5" (38mm) wide, 2.4" (61mm) diameter
12mm hex
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle


Associated RC10 B5 Factory Team off-road buggy kit, body with wing
decals, wheels, diff lube, shock oil and instruction manual


Radio: Two-channel with high-speed servo
Radio Batteries: (8) AA size
Tires: 1/10 scale buggy for 2.2" wheels
Pinion Gear: 48P, number of teeth to be determined by motor
Motor: 540 size for buggy applications
The DuraTrax Element 3900kV Brushless System (DTXC3122) is an ideal,
affordable motor and ESC for this vehicle.
Battery: 7.4V 2S LiPo, or 6.0V LiFe (saddle, shorty, or square)
Battery Charger: To match selected battery
Building and track equipment


Length: 15.1" (385mm)
Wheelbase: 11 - 11.1" (279 - 281mm)
Length: 10.7" (272mm)
Width: 4.2" (108mm)
Height: 2.6" (67mm)


For Replacement Ball Bearings use
Qty. Size Location Qty. Bearing Set
4 3x7mm Steering Bellcrank 2 DTXC1506
4 5x10mm Steering Block 2 DTXC1535
2 5x8mm Differential 1 DTXC1523
2 10x15mm Gearbox 1 DTXC1595
4 6x12mm Gearbox 2 DTXC1569
2 5x10mm Idler Gear 1 DTXC1535
2 10x15mm Rear Hub 1 DTXC1595
2 6x13mm Rear Hub 1 DTXC1573

jxs 12/26/13

See Tower Catalog page 83.
Easy RC: Cars & Trucks
‐ Mailing Address ‐
‐ Additional Contact Information ‐