Axial 1/10 SCX10 Jeep Wrangler G6 Falken 4WD RTR

Tower Stock# LXECDR  •  Manufacturer Stock# AX90036
Axial 1/10 SCX10 Jeep Wrangler G6 Falken 4WD RTR (large view)
Notes from our tech department:
This is the Electric Powered, 2.4GHz Radio Controlled, 1/10 Scale
Ready to Run SCX10 Jeep G6 Falken Off Road Vehicle from Axial.

Jeep and related logos, vehicle model names and trade dresses
are trademarks of Chrysler Group LLC and are used under
license by Axial R/C Inc, Chrysler Group LLC 2014.


Chassis: Scale steel C-channel with cross bracing for reinforcement,
assembled with hex hardware, rock sliders allows vehicle to
slide off of rock obstacles
Drive: 4-wheel shaft with WB8 Wild Boar 3-piece driveshafts,
strengthened slider-floater tube, constant velocity joint design
Diff Locker: One-piece sintered metal construction reduces slop in
drive train by eliminating cross pin
Axles: Hardened steel
Motor: 27T brushed
Radio: Axial AX-3 2.4GHz 2-channel pistol grip with servo reverse,
trim dials, battery indicator, 3-channel receiver
Steering Servo: Tactic TSX45 metal gear, 151 oz-in of torque, dual
ball bearings
Electronic Speed Control: Axial AE-5 waterproof, 3S capable,
switchable drag brake settings
Bumpers: Front, Poison Spyder Rock Brawler with functional D-rings
and mounting holes for LED lights (LED lights not included)
Rear, Swing out tire carrier on rear bumper
Body: .040" (1mm) thick molded polycarbonate, trimmed and printed
officially licensed Jeep Wrangler G6 Falken Edition with molded
interior and steering wheel, bolt-in cage, and roof mounted light
bar (LED lights not included)
Tires: R35 (sticky) compound Falken Wildpeak M/T 4.7" (119mm)
diameter, 1.5" (38mm) wide, extra tire height provides additional
ground clearance for tough trails
Wheels: 1.9" (48mm) wide Walker Evans, nylon construction, black in
color, 12mm hex
Transmission: Designed to place the weight of motor as low as
possible for a low center of gravity, overall ratio can be
adjusted from 15:1 up to 74:1 using different pinion/spur gear
Slipper clutch: Dual design with pad on each side of spur gear
for added surface area for more precise tuning and holding power,
32 pitch gearing for high torque applications
Rear Suspension: 4-link optimized to reduce axle steer and torque
twist, proper anti-squat and roll characteristics help with steep
off-camber climbs
Shocks: Oil-filled dual rate with realistic looking non-functional
coilover shock reservoir, plastic body


Axial RTR SCX10 Jeep G6 Falken, 2-ch 2.4GHz Radio, High-Torque
Steering Servo, ESC, 27T Brushed Motor, Body w/Interior, Decals
Instruction Manual


Transmitter Batteries: Four AA size
Battery: 7.2V NiMH 6-cell stick pack or 2-3S LiPo pack
Battery Charger: Compatible with selected battery
Track equipment


Length: 18.1" (460mm)
Width: 8.8" (225mm)
Height: 9" (230mm)
Wheelbase: 12" (305mm)
Ground Clearance: 2.7" (68mm)
Weight: 4.65lbs (2.1kg)
Length: 16.5" (419mm)
Width: 7" (178mm)
Height: 6" (152mm) measured at light bar


Optional Axial LED light systems include;
AX24251 Axial NVS Night Visions System, AXIC4251
AX24257 Simple LED Controller, AXIC2425

For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 5x11mm Fr Dogbones 1 DTXC1547
2 10x15mm Fr Dogbones 1 DTXC1595
2 5x11mm Front Axle 1 DTXC1547
2 5x11mm Fr Hubs 1 DTXC1547
2 10x15mm Fr Hubs 1 DTXC1595
2 5x11mm Rear Dogbones 1 DTXC1547
2 10x15mm Rear Dogbones 1 DTXC1595
2 5x11mm Rear Axle 1 DTXC1547
4 5x10mm Transmission 1 DTXC1535
2 8x16mm Transmission 1 DTXC1585

jxs 05/30/14
updated tlc 6/11/14

See Tower Catalog page 87.
Easy RC: Cars & Trucks
Review #1
‐ Manufacturer's Web Page ‐
‐ Mailing Address ‐
‐ Additional Contact Information ‐