ARRMA 1/8 Kraton 6S BLX Brushless 4WD RTR

Tower Stock# LXECKV**  •  Manufacturer Stock# ARAD81**
WARNING: This product contains a chemical known to the State of California to cause cancer and birth defects (or other reproductive harm). Exposure through skin contact and ingestion may occur.
ARRMA 1/8 Kraton 6S BLX Brushless 4WD RTR (large view)
Easy Pay
Request 3 Payments ($166.67, $166.66, $166.66) Details
Color Availability
Notes from our tech department:
This is the Electric Powered, 2.4GHz Radio Controlled 1/8th scale,
Ready to Run Kraton 6S BLX Speed Truck from ARRMA.

**The Green version, ARAD81GG, and Blue version ARAD81BB
were replaced by the**
**Green and Black version, ARAD81GL arriving early June 2016**
**Red and Black version, ARAD81RL arriving in late June 2016.**


Chassis: 0.12" (3mm) thick aluminum, black in color
Drive: Four wheel with CVD driveshafts
Radio: Tactic TTX300 2.4GHz 2-channel with ADS-15M waterproof
steering servo, 208oz/in (15kg/cm) torque
Motor: BLX4074 2050Kv 4-pole brushless (ARAG2000)
ESC: Waterproof BLX185 150A 6S with built-in cooling fan, and male
XT90 connector
Shocks: 16mm red anodized aluminum body, oil filled
Shock Towers: 0.20" (5mm) thick aluminum, black in color
Suspension: Pivot ball with anti-roll bar
Differentials: Three metal gear
Roll Cage: Composite internal
Body: Trimmed and painted polycarbonate, nylon rear wing
Motor Mount: Aluminum
Battery Holder: Adjustable hook and loop straps, holds two 2S, or
two 3S LiPo cells
Tires: dBoots Minokawa, width: 3.3" (85mm), diameter: 6.2" (157mm)
Wheels: Five split spoke, black in color 17mm hex, diameter: 3.8"
(97mm), width 2.6" (66mm)
Camber: Adjustable front and rear, camber refers to the angle of the
tops of the tires from vertical when viewed from front or behind
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to
the chassis
Warranty: Two year limited warranty beginning at date of purchase


RTR Kraton 6S BLX Speed Truck with Painted Body, 2.4GHz Radio,
Waterproof Steering Servo and Receiver Box, BLX185 ESC, 2050Kv
Brushless Motor, Instruction Manual. two XT90 Battery Connectors
and Bridging Wire for single pack use


AA Batteries: Four for transmitter
LiPo Battery: Two 2-3S 5000mAh 35C minimum LiPo with XT90
connector, Duratrax 11.1V 5000mAh 35C batteries (DTXC1969)
recommended, or one 4-6S LiPo battery
Battery Charger: To match selected battery
LiPo charging sack, building & track equipment


_ Length: 24 in (590mm)
Width: 18.5 in (470mm)
Height: 7.5 in (195mm)
Wheelbase:14.9 (378mm)
Ground Clearance: 1.3 in (33mm)
Weight: 177oz (5kg)
Maximum Battery Tray Dimensions: 6.2 x 2.0 x 1.8" (158 x 51 x 46mm)
Length: 18.6" (472mm)
Width: 8" (203mm) behind front wheels, narrowest point
Width: 10.03" (255mm) at rear wheels, widest point
Height: 6.25" (159mm)


Available in the following body color schemes;
Green and Black, ARAD81GL
Red and Black, ARAD81RL


For replacement ball bearings use:
Qty. Size Location Qty. Bearing Set
2 15x21mm F&R Inner Hubs 1 ARAC3162
2 8x16mm F&R Inner Hubs 1 ARAC3156
2 5x10mm Idler Gear 1 ARAC3200
2 5x10mm Input Shaft 1 ARAC3200
2 10x15mm Diff Gear 1 ARAC3202
6 8x16mm Fr, Ctr & R Diffs 3 ARAC3156

ajw 1-30-14
jAM 11/03/15

See Tower Catalog page 77.
Easy RC: Cars & Trucks
Review #1
‐ Manufacturer's Web Page ‐
‐ Mailing Address ‐
‐ Additional Contact Information ‐