This is the radio controlled, glow powered, Almost-Ready-to-Fly
Sonic High Wing sport trainer airplane kit from Phoenix Aircraft Models.
For beginning modeler/fliers.
FEATURES: Construction: Built-up balsa and plywood
Covering: Pre-applied PVC type heat shrink film, color scheme is
mostly White on the fuselage and wings with Red, Dark Blue and
Green accents
Wings: Two-piece wood, must be joined before installation
Radio Compartment: Plywood reinforced, easily accessible under wing
Canopy: Silver painted section on fuselage to simulate canopy area,
no canopy or pilot detail
Landing gear: Pre-bent 3/16" (4mm) wire with 2" (51mm) foam rubber
main and nose gear wheels
Aileron Control: Dual servo, standard size and torque required
Hardware: Hinges, wing bolts and all other required fasteners
included
Motor Mount: Nylon, pre-mounted in fuselage
INCLUDES: Prebuilt and pre-covered wings fuselage and tail section tricycle
landing gear with 2" (51mm) wheels, nylon engine mount, pre-bent
pushrods, hardware package, fuel tank, hinges, all hardware and
fasteners and photo-illustrated instructions
REQUIRES: Engine: .25-.32 cu in (4.1-5.2cc) 2-stroke engine
Muffler: Standard type included with engine
Radio: Four channel
Servos: Five, 42 oz/in torque minimum
(2-aileron, 1-elevator, 1-rudder, 1-throttle)
Misc. Items: 2" (51mm) spinner, 1/4" foam rubber padding, 3' medium
fuel tubing, fuel filter, propeller, building and field equipment
SPECS: Wingspan: 52.3" (133cm)
Length: 40.9" (104cm)
Airfoil: Semi-symmetrical
Configuration: High wing
Specs such as Wing Area and Wing Loading are not provided by the
manufacturer
Center of Gravity: 2.75" (70mm) Back from the wing's leading edge
at the fuselage sides.
Control Throws-
Ailerons: Up & Down 0.20" (5mm)
Elevator: Up & Down 0.31" (8mm)
Rudder: Right & Left 0.51" (13mm)
jxs 7/22/03
ir/jxs
updt jxs 06/13/11
|