Futaba 4YF 4-Channel FM/4 S3004 Servos 63

Tower Stock# LXEFJ463  •  Manufacturer Stock# FUTJ40**
Futaba 4YF 4-Channel FM/4 S3004 Servos 63 (large view)
Notes from our tech department:
This is the Futaba 4YF 4-Channel FM Radio System
with the R168DF Receiver and four S3004 Ball Bearing Servos.


All-channel servo reversing for more installation options
Transmitter and receiver NiCds made from genuine Sanyo cells can be
recharged simultaneously with the included 50mA overnight charger
Power and servo reversing switches are located down and out of the
way for convenience and to avoid accidental changes
The battery meter features one Green and one Red LED for easy-to-read
GO/NO GO status.
Ball bearing servos for smoother operation than standard servos
Spring loaded trainer toggle switch for instant "OFF"
Gimbals have knurled tops for a better "feel" on the sticks and to
prevent finger slippage.
One year limited warranty


One Futaba 4YF 4-channel FM radio system with NiCd batteries, 120V AC
charger, frequency flags, neck strap, servo tray, switch harness,
four S3004 servos, servo mounting hardware, transmitter and
receiver crystals and R168DF Receiver


Charging batteries overnight


Modulation Method: FM (Frequency Modulation)
Power Requirement: 9.6V NiCd battery
Current Drain: 180mA
Trainer Port: Micro

R168DF Receiver: (72MHz FUTL0832, 75MHz FUTL0833)
Length: 2.2" (55.5mm)
Width: 1.1" (28.5mm)
Height: .8" (19.8mm)
Weight: 1oz (28g)

Charger: FBC-8B(4)
Input: 120V AC 60Hz 4W
Output: Tx 9.6V DC 50mA
Rx 4.8V DC 50mA
Tx battery: 600mAh (FUTM1440)
Rx battery: 600mAh (FUTM1295)
Bands: 72,75MHz

S3004 Ball Bearing Servo FUTM0004
Speed: .23 sec/60 @ 4.8V
.19 sec/60 @ 6V
Torque: 44.3 oz-in (3.2 kg-cm) at 4.8V
56.8 oz-in (4.1 kg-cm) at 6V
Length: 1.59" (40.4mm)
Width: .78" (19.8mm)
Height: 1.42" (36mm)
Weight: 1.30oz (38g)
Connector: "J" type with approx. 5" wire

jxs 6/17/03

Easy RC: Radio Systems
‐ Manufacturer's Web Page ‐
‐ Mailing Address ‐
‐ Additional Contact Information ‐