This is the 75MHz Hitec Aggressor CRX 3 Channel FM Computer Radio System.
This standard version includes HS-325 Ball Bearing Servo,
DCX 3ch Receiver and Switch Harness.
FEATURES: Twenty model memory with model copy and model reset
Six character model naming
Quick response 1024 step resolution
Sub-trims
Shift or linear dual mode third channel with mixing
Spectra synthesized module capability (Spectra module optional)
LCD display
RF LED
Dual rate steering, anti-lock braking and brake ATL (Adjustable
Travel Length) switch
One year limited warranty
INCLUDES: 75MHz Aggressor CRX Pistol Grip Transmitter
HP-MIC module
#54113 600mAh Transmitter Battery
One HS-325HB Standard Servo, HRCM3326
DCX 3ch 75MHz Receiver
CG-25A NiCd Charger
Switch Harness, HRCM4405
Antenna Flag, Hitec Sticker Sheet and Instruction Manual
REQUIRES: Installing servo and receiver in vehicle
Charging transmitter battery
SPECS: Transmitter:
Current Drain: 180mA
Power Supply: 8 AA alkaline, NiCd or NiMH batteries (NiCd supplied)
Frequencies: 75MHz (30 channels)
DCX Receiver: Length: 1.6" (41mm)
Current Drain: 30mA +/- 0.3mA Width: 1.1" (28mm)
Height: 0.7" (18mm)
Weight: 0.75 oz. (21.3g)
Servo: Speed: 0.19 sec/60 degrees at 4.8V Length: 1.6" (41mm)
Speed: 0.15 sec/60 degrees at 6.0V Width: 0.8" (20mm)
Torque: 42.00 oz-in at 4.8V Height: 1.4" (37mm)
Torque: 51.00 oz-in at 6.0V Weight: 1.7oz (48g)
Charger: Input Voltage: 110V AC, 50/60Hz (US Standard)
Output Tx: 10.8V DC, 55mA
Output Rx: 4.8V DC, 55mA
COMMENTS: Accessories available include;
#54410 HRCM4411 AA Battery Holder
jxs 4/19/04
ir/jxs