This is a Set of 90° Non-Rotating Heavy Duty Retracts for
Model Airplanes weighing 5-10 Pounds.
FEATURES: Heavy duty struts, 3/16" diameter wire
The Robostruts will NOT directly fit these struts (the bushing that
comes with the Robostruts, ROBQ1700 - ROBQ1706, can be drilled
out to 3/16" to make them fit).
Positive UP and DOWN lock and smooth cam action mechanism.
Glass-filled nylon housing supports an Aluminum pivot bearing.
INCLUDES: One 90° Heavy Duty Retract Unit Right Side
One 90° Heavy Duty Retract Unit Left Side
Eight Mounting Screws
One Detailed Installation Instruction Sheet
SPECS: Retract Unit: Length: 3.69" (including air cylinder)
Struts: Length: 7.75"
Weight (per pair): 6oz
REQUIRES: Air Control Kit (Tubing, Valves, Air Vessel).
Hand Pump with Gauge, use ROBQ2363
COMMENTS: Optional Quick Connector (ROBQ2395)
(for ease in connecting and disconnecting the lines to the wings)
Optional Air Restrictors (ROBQ2389)
(restricts air flow to the Retract for a realistic movement,
and slows down the Retract Mechanism to scale speed).
A standard servo may be used to operate these retracts.
Axles are Not Included (The instructions state how to bend the struts
Order ROBQ0659 for Axle Adapter with 3/16" Axle
updt jxs 11/05/05