This is a Set of 90° Non-Rotating Heavy Duty Retracts for
                 Model Airplanes weighing 5-10 Pounds.

FEATURES: Heavy duty struts, 3/16" diameter wire
          The Robostruts will NOT directly fit these struts (the bushing that
            comes with the Robostruts, ROBQ1700 - ROBQ1706, can be drilled
            out to 3/16" to make them fit).
          Positive UP and DOWN lock and smooth cam action mechanism.
          Glass-filled nylon housing supports an Aluminum pivot bearing.

INCLUDES: One 90° Heavy Duty Retract Unit Right Side
          One 90° Heavy Duty Retract Unit Left Side
          Eight Mounting Screws
          One Detailed Installation Instruction Sheet

SPECS:    Retract Unit: Length: 3.69" (including air cylinder)
                        Width:  1.75"
                        Depth: 1.125"
                Struts: Length: 7.75"
                        Diameter: 3/16"
                        Weight (per pair): 6oz

REQUIRES: Air Control Kit (Tubing, Valves, Air Vessel).
          Hand Pump with Gauge, use ROBQ2363
          Wheels.

COMMENTS: Optional Quick Connector (ROBQ2395)
            (for ease in connecting and disconnecting the lines to the wings)
          Optional Air Restrictors (ROBQ2389)
            (restricts air flow to the Retract for a realistic movement,
             and slows down the Retract Mechanism to scale speed).
          A standard servo may be used to operate these retracts.
          Axles are Not Included (The instructions state how to bend the struts
            with heat)
          Order ROBQ0659 for Axle Adapter with 3/16" Axle

                                                                     4-28-93eke
                                                                          ir/jl
                                                              updt jxs 11/05/05