Designed for the Top Flite P-39 Airacobra.
Shock Absorber Hinge Action On Nose Gear.
Pre-Primed Gray Color.
Self centering steerable spring nose gear keeps plane straight
Durable Aircraft Steel and Aluminum with Postive Up and Down locks,
and Functional Oleo Struts
One Steerable Nose Gear Pneumatic Retract Assembly.
(Strut and Retract Unit Must Be Joined Together)
One 1" Wide - 3/16" Diameter Wheel Shaft w/Screws.
One ROBQ2302 #188VR Complete Air Kit (lines, tank, valves)
One ROBQ2363 Extra Air Tubing
One SULQ3121 Pull-Pull Kit
Misc. Hardware to Mount Retract Into Airplane and Servo for Valve.
(For the Main Gears to make a Complete Set, see COMMENTS)
To Complete This Set, use #606HD 85 Degree Robart Main Gear Retracts.
15 Degree Forward Angle w/Fork for 2-1/2" Wheel.
Overall length from mount plate to axle center hole: 6-3/4"
Distance between mount holes front to back: 1-3/4"
Distance between mount holes side to side: 1-1/2"
Retracted overall length: 8-1/2"
Retracted overall height (minus hinge spring): 1-3/8"
Retracted overall width of housing: 1"
Wire Strut Diameter: 7/16"
Weight per pair: 7.5 oz.
Weight Bearing Capacity: 14 pounds