This is the Futaba 12V DC Battery Charger.
          Charges NiCd and NiMH transmitter and receiver batteries,
                             and glow plug igniters.

FEATURES: Peak charge detection, auto cut-off and audio alert
          LCD screen displays input and output voltage, charge current, peak
            voltage, charge time, and amount.

INCLUDES: One Futaba 12V Battery Charger with cigarette lighter adapter,
            alligator clips, 28" (711mm) transmitter charge cord, and two
            20" and 80" (508mm and 2032mm) receiver charge adapter cords.

REQUIRES: 11-15V DC power supply having an output capacity of 6A or more.
          (GPMP0901)

SPECS:    Battery Range: Tx: 6-8 cells, 500-2000mAh
                         Rx: 4-6 cells, 50-2000mAh
                         Glow Plugs: 1 cell, 2000-3000mAh
          Input Voltage: DC11V-16V
          Operation Voltage: 10.5V
          Charging Current: Tx 0.5A-2A
                            Rx 0.05-2A
          Cut Off: Delta Peak
          Trickle charge rate: at .05 to .45A rate is 5 mils
                               at .5 to 2.5A rate is 70 mils
          Length:    6"   (152mm)
          Width:     3.4"  (86mm)
          Height:    1.4"  (36mm)
          Weight:    355g (12.5oz)

COMMENTS: For use with NiCDs or NiMH batteries only.
          TX and RX can be charged simultaneously.
          Don't short-circuit or reverse connect battery.

          Avoid places where the charger will be exposed to direct sunlight.
            Perform charging within the 41-104F°(5-40C°) temperature range.
          Do not charge radio batteries and glow starter simultaneously.

                                                                    jxs 9/12/03
                                                               upd NNA 12/18/03
                                                                         ir/jxs
                                                            updated jpg 6/12/08