This is the 9.5-12mm Servo Horn Drill Gauge from Futaba.
Provides pinpoint measurments for drilling mounting holes from the
center point of the servo horn
Measures holes from the center point of a servo horn in half
millimeter increments (9.5 ,10, 10.5, 11, 11.5, and 12)
Transparent green, plastic construction
Brass inserts in each gauge hole protects the plastic from damage
One drill gauge
Nothing is required item need to make it work?)
Diameter: 2.35" (60mm) Thickness: .085" (2.15mm)
There is also a gauge that will measure 12.5mm to 15mm, FUTM2400
– If you need more information, use these Futaba resources –
Tower Hobbies Has Been Serving Hobbyists Since 1971 • Call 800-637-6050 or 217-398-3636
We accept the following:
Unauthorized use of any materials presented here is prohibited. Copying or reproducing any elements from this page is not permitted. All prices, descriptions and availability subject to change.
‡Displayed within some areas of our web site, the Retail Price is suggested by the manufacturer or supplier, or estimated in keeping with standard industry practice. It may not represent the prevailing price in your area or a price that Tower Hobbies has ever offered for the item.