Hobbico Accu-Glo MkII Power Panel

Tower Stock# LXFKZ1  •  Manufacturer Stock# HCAP0306
Hobbico Accu-Glo MkII Power Panel (large view)
Money Saving Combos
Notes from our tech department:
This is the Hobbico Accu-Glo II Power Panel.
This panel powers Starters, Chargers, Fuel Pumps, and
Glow Starters and monitors condition of Glow Plugs.

This Power Panel comes with a hard plastic case or can be mounted to any Field
Box with a standard sized cutout for a Power Panel.


Fuel Pump switch from original Accu-Glo was replaced by separate
color-coded push-buttons for "FILL" and "EMPTY." Press once to
Start, again to Stop
Four LEDs, 11V, 11.5V, 12V, and 12.5V indicate Field Battery
condition-an improvement from one light that glowed either Green or
Red on original version
Glow Starter Charger keeps unit fully charged at a constant
300-400mA rate
Automatic Glow Power Management section tells when glow plug is fully
charged and if plug continuity is good
Adjustment dial allows automatic glow heat customization to the
model; once set the unit maintains proper heat regardless of glow
plug's condition
Two year limited warranty


One Hobbico Accu-Glo II Power Panel with two alligator clips, two
Black and two Red banana plugs, two plastic plug covers, four
M3x10 self-tapping screws to mount panel to Field Box


Input Voltage: 11-13V DC
Input Voltage Indicators: Four LEDs
Starter Jacks-Output Voltage: 12V DC
Fuel Pump Controls: Yellow "FILL" pushbutton; Red "EMPTY" pushbutton
Glow Heat Power Circuit: Automatic heat adjustment
Glow Heat Status Indicators: "HOT" and "COLD" LEDs
Glow Heat Continuity Indicators: "GOOD" and "BAD" LEDs
Glow Starter Charger Current: 300-400mA constant current (not timed)
Glow Starter Output Jack: Glow driver mounting lug with LED
Fuse: 7.5A spade type
Weight: 8.3oz (235g)
Dimensions: 6" x 3.7" (152 x 94mm)


12V battery, use HCAP0800

jxs 11/17/03

See Tower Catalog page 65.
‐ Manufacturer's Web Page ‐
‐ Mailing Address ‐
‐ Additional Contact Information ‐