This is the 1/10 scale electric powered, radio controlled, 2 wheel drive
             Tamiya Blackfoot Xtreme off-road Monster Truck Kit.
                                                                              _
FEATURES: Chassis: Polycarbonate monocoque
          Drive: Rear wheel drive
          Motor: Stock type, pre-installed on gearbox with leads attached
          Bushings: Fully equipped throughout kit except for two ball bearings
            on the differential gear, can be fully equipped with bearings see
            COMMENTS
          Shocks: Friction, (not oil-filled) plastic bodied with coil-over
            springs
          Gearbox: Closed rear, preassembled
          Differential: Planetary gear
          Transmission: Single-speed
          Tires: Spiked 5.1" (130mm) outer diameter, 2.1" (53mm) wide,
            2.12" (54mm) inner diameter
          Wheels: Yellow, six swept spoke 2.1" (54mm) diameter, 1.9" (48.5mm)
            width
          Speed Control: Electronic, Tamiya TEU-101BK
          Body: Molded Black plastic pickup truck style with Brown tinted
            windows, chrome finish plastic roll bar, grille, front and rear
            bumpers
          Decals: Peel and stick body and light accents and sponsor decals
          Bumpers: Front, Black plastic
          Suspension: Fixed non-adjustable
          Camber Tie Rods: Fixed non-adjustable vertically
          Caster: Adjustable, caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to the
            chassis
          Steering: Bell-crank type
          Servo Saver: Included

INCLUDES: Tamiya Blackfoot Xtreme with friction shocks, motor, Electronic Speed
            Control, molded Black body, tires, wheels, 18 tooth pinion gear,
            decals, roll bar, instructions
                                                                              _
REQUIRES: Radio: 2-channel with One standard size servo
          Radio Batteries: (8) AA size
          Battery: 6-cell flat pack w/ standard connector (7-cell will not fit)
          Charger: AC/DC timed or peak for 6-cell battery
          Misc. Items: Building and track equipment

SPECS:      VEHICLE-
          Length:  17.5" (445mm)
          Width:   12.2" (310mm)
          Height:  10.5" (267mm)
          Weight:      4 lbs (1840g) approx.
          Tires-Front, Rear: 5.1" x 2.1" x 2.12" (130mm x 53mm x 54mm)
            BODY-
          Length:  15.6" (397mm)
          Width:   6.75" (171mm) at rear wheels (widest point)
                   6.25" (158mm) behind from wheels (thinnest point)
          Height:      4.5"  (114mm)

COMMENTS: For Replacement Ball Bearings use:
            Qty.  Size           Location              Bearing Set Qty.
            (4)  5 x 11mm       rear axles            (use 2 DTXC1547)
            (4)  5 x 11mm       front axles           (use 2 DTXC1547)
            (6)  5 x 11mm       diff gearbox          (use 3 DTXC1547)

          Body pictured on the box is molded in Black with Neon Pink body
            accents and all body trim decals applied
                                                                   jxs 12/30/03