This is a kit to add flying wires or tail brace|
wires to an RC aircraft model.
Includes wires and hardware along w/general installation instructions
6 2-56 brass couplers
4 2-26 eyebolts
8 2-56 Clevises
9 Brackets with washers installed
8 feet of .032' stainless steel cable
8 Crimp Loops
8 Feet of .032 Synthetic Fiber cable.
8 retaining clips.
Pliers, wire cutters. crimper, 4-40 screws or bolts
Allows the RC scale modeler to add flying/bracing wires to a model.
Wires can be used to brace wings, tail, landing gear.
updt jxs 03/03/06