Add style and strength to your model with Aluminum Servo
                           horns from Futaba.

FEATURES: Sturdy aluminum construction (silver in color)
          Double sided arm with 3 pre-drilled starter holes on each arm
          Splined mounting hole for easy repositioning
          Designed to fit Futaba standard size servos with approx. 6mm output
           shaft. Many larger (1/4 scale) servos have approx. 7-1/2mm shaft.

INCLUDES: One 1.5"(38mm) long silver aluminum servo horn (total length of the
           arm is 3" (76mm) )

REQUIRES: Servo with 6mm diameter output shaft
          Servo horn screw - FUTM2260

SPECS:    Length: 1.5"(38mm) (from center of mounting hole to center of first
           starter hole on each arms)
          Total length: 3" (76mm)
          Thickness: .122" (3.10mm)
          Diameter of the three starter holes: .078" (2mm)
COMMENTS: A notice from Futaba reguarding this servo horn:
           As a rod hole you use becomes increasingly far from the axis of a
           servo horn, the torque generated by external forces such as shocks
           also increases. As a result, the gear combined with such a servo
           horn will become susceptible to breakage.

           If servo is operated for more than three minutes with its current
            flowing while the servo horn is locked, the electronic parts of the
            servo may possibly heat up. In the worst case, it may cause damage
            or smoke.

           This servo horn should be used with high torque servos.
                                                                  kpm02/10/2004
                                                                         ir/jxs