This is the replacement Fuselage for the Hobbico Nexstar
                       Select airplane (HCAA17**).

FEATURES: Pre-built balsa and plywood construction
          Pre-covered in a polyester based, heat shrink covering
          Pre-installed nosegear bracket
          Pre-installed Pivotflex wing mount
          Pre-installed plastic pushrods tubes

INCLUDES: One fuselage with the above mentioned features
          One plywood radio tray with hook and loop material
          Two 3/8" long wood screws for the radio tray
          One plastic AFS mounting plate
          Two 5/16" long wood screws for the AFS mouting plate
          One plastic washer for the AFS mouting plate

REQUIRES: Installation of all components following the instructions that came
            with the original model.
SPECS:    Length: 59.5" (1257mm)
          Height: 7.4"
          Width: 3-7/8"

COMMENTS: Does not include the engine mount. Order HCAA3739 if the mount is
           required.
                                                                  kpm01/12/2004
                                                                         ir/jxs