Coverite 21st Century Microlite Transparent Blue

Tower Stock# LXGDW2  •  Manufacturer Stock# COVQ0251
Coverite 21st Century Microlite Transparent Blue (large view)
Quantity Discounts Available
Save $1.89
3 for $40.08
Save $4.20
6 for $79.74
Save $9.23
12 for $158.65
Notes from our tech department:
This is a 72" (183cm) roll of 21st Century Coverite Microlite Covering
in Transparent Blue.

**Microlite CANNOT be painted with Coverlite 21st Century or Top Flite**
**LustreKote spray paint. Using any type of paint is not necessary**
**or recommended.**


Perfect for all Park Flyers, indoor models and light fly aircraft
Ultra light weight, only 0.6oz (17g) per square yard
High-gloss finish
Adhesive pre-applied to back


One 72" x 27-3/4" (183cm x 70cm) roll of 21st Century Coverite
Microlite in Transparent Blue
One instruction sheet


Sealing Iron (COVR2700)
Iron Cover (COVR2702)
Trim Seal Iron (COVR2750)
Hobby Knife (RMXR6909)
#11 Blades (5-pack RMXR6930, 100-pack HCAR0311)
Single Edge Razor Blades (10-pack HCAR0212, 100-pack HCAR0312)
Metal Straightedge (HCAR0460)
24" x 36" (460mm x 910mm) Builder's Cutting Mat (HCAR0456)
Covering Thermometer (COVR2410)
Masking Tape (GPMR1010)
Sandwich bag containing lead or steel shot


Length: 72" (183cm)
Width: 27-3/4" (70cm)


The ideal temperature for applying Microlite to open framework such
as wing ribs, leading and trailing edges, fuselage stringers
and also to sheeted surfaces is about 175-195F (80-90C).
Increase iron temperature to 230-250F (110-120C) for tightening
the covering over open framework. For further info on covering
techniques and iron temperature see instruction sheet with each
jxs 5/04/04

‐ Manufacturer's Web Page ‐
‐ Mailing Address ‐
‐ Additional Contact Information ‐