This is the radio controlled, glow powered, Almost-Ready-to-Fly,|
Great Planes P-51 Mustang 1/12 scale airplane.
For Intermediate to Advanced Modeler/Fliers.
AMA Event 750 Combat Class 2610 Legal.
Construction: All balsa and plywood
Controls: Throttle, ailerons, elevators
Wings: One-piece with plywood wing joiner
Covering: Factory applied iron-on film, color scheme is aluminum with
Yellow nose, Black striping and Red wing tips
Cowling: Pre-painted, fiberglass
Canopy: Clear, single
Aileron Control: Single servo
Landing Gear: None this is a belly lander, hand launch aircraft.
Building Time: Ready to fly in only 7-10 hours.
Engine Mount: Composite, adjustable
Spinner: 2.5" (63mm) Yellow plastic
Warranty Period: Great Planes guarantees this kit free from defects
in both material and workmanship at date of purchase.
One Great Planes P-51 Mustang 1/12 scale sport airplane with pre-
built and covered wings, fuselage and tail assemblies, pushrods,
4oz (12Occ) fuel tank, wood servo trays and wing joiners, spinner
hardware package and photo-illustrated instructions.
Engine: .15- .25 cu in (2.5 -4.0 cc) 2-stroke OR
.30 cu in (5cc) 4-stroke
Muffler: Standard muffler, engine mounts inverted
Servos: 3-Micro servos with at least 34 oz-in torque
Servo Extension 12": One
Misc. Items: Glow plug, ¼" foam rubber padding, medium fuel tubing,
fuel filter, propeller, building and field equipment.
Wingspan: 38.5" (980mm)
Wing Area: 264sq in (17sq dm)
Flying Weight: 2.5-3lb (1130-1360g)
Wing Loading: 22-26 oz/sq ft (70-80 g/sq dm)
Length: 34" (865mm)
Center of Gravity: 2-1/4" (57mm) Back from the wing's leading edge
Control Throws- High Rate Low Rate
Elevator: Up & Down 3/8" (9.5mm) ¼" (6mm)
Ailerons: Up & Down 5/16" (8mm) ¼" (6mm)
Pilot shown inside the plane is not included.
Replacement Parts: GPMA2620 Fuse set
GPMA2622 Tail set
GPMA2625 Decal sheet
If a replacement fuel tank is needed, order the Sullivan 4oz
tank (SULQ1737), or the DuBro 4oz tank (DUBQ0204).
Some minor trimming and modifications may be required.