This is the Castle Creations Phoenix-10 amp Sensorless ESC for Brushless motors
This speed control is specifically designed for Brushless application.
NOT to be used with Brushed motors. Doing so will ruin ESC.
Extremely low resistance (.013 Ohm)
High rate (11kHz) switching
Up to 10A continuous current with proper air flow, 15A surge
Five to eight cells with four micro servos
Up to ten cells with three micro servos
16 cells max with BEC disabled
Dynamic braking ensures folding props fold properly
BEC (1.5A) provides power to receiver and servos-eliminates need for
a separate receiver battery User programmable features:
Low voltage cutoff
Auto-LiPo setting automatically sets 3V/cellfor 2-4 cell LiPo packs
Soft start ramp up
Runs motor in forward or reverse
Auto motor in cutoff with reset
Safe power on arming program ensures motor won't accidentally turn ON
Low torque soft start prevents damage to fragile gearboxes
Auto Shut Down when signal is lost or radio interference becomes
Phoenix 10 ESC
Soldering to motor and connector
Soldering iron HCAR0775
Battery connector (specific to customer's connectors)
Length: 1" (25.4mm) Width: 3/4" (19mm) Height: 1/8" thick (3mm) Wire Length: 4" (102mm) motor ends 5.5" (140mm) battery end
5.5" (140mm) servo wire with Universal connecter
Be sure polarity is correct. Incorrect polarity can damage the
speed control unit.
– If you need more information, use these Castle Creations resources –
Tower Hobbies Has Been Serving Hobbyists Since 1971 • Call 800-637-6050 or 217-398-3636
We accept the following:
Unauthorized use of any materials presented here is prohibited. Copying or reproducing any elements from this page is not permitted. All prices, descriptions and availability subject to change.
‡Displayed within some areas of our web site, the Retail Price is suggested by the manufacturer or supplier, or estimated in keeping with standard industry practice. It may not represent the prevailing price in your area or a price that Tower Hobbies has ever offered for the item.