This is a 1/2oz (15ml) jar of Dark Anodonic Gray (Buffing Metalizer)
Metalizer Lacquer For Airbrush Only.
Metalizer is a unique metalizing "plate" finish, especially
formulated for plastic models.
Metalizer system consists of a wide range of buffing and non-buffing
1/2oz colors which will allow the modeler to duplicate virtually
any natural metal finish.
Jar can be attached and used with most airbrush systems.
One 1/2oz (15ml) jar of Dark Anodonic Gray (Buffing Metalizer)
Eye, Lung and Skin protection.
Testors #1409 Metalizer Sealer to go over paint and decaling.
Testors #1419 Metalizer Thinner to clean airbrush.
Keep out of reach of children.
Contains Butyl Acetate.
Highly Flammable Paint, avoid heat, sparks or open flame.
Avoid eye contact, skin contact or prolonged breathing of vapors,
best to use in a well-ventilated area. Warning: This product contains a chemical known to The State of
California to cause birth defects or other reproductive harm.
Inhaling contents is harmful to respiratory tract and nervous
To use. Stir well. Airbrush light mist coats. Drys to touch in
30 minutes. Decal as usual. Seal with #1409 Sealer. Clean
airbrush with #1419 Thinner.
For Buffing, wait until after 10 minutes dry.
Recommended for ages 8 and over.
– If you need more information, use these Testors resources –
Tower Hobbies Has Been Serving Hobbyists Since 1971 • Call 800-637-6050 or 217-398-3636
We accept the following:
Unauthorized use of any materials presented here is prohibited. Copying or reproducing any elements from this page is not permitted. All prices, descriptions and availability subject to change.
‡Displayed within some areas of our web site, the Retail Price is suggested by the manufacturer or supplier, or estimated in keeping with standard industry practice. It may not represent the prevailing price in your area or a price that Tower Hobbies has ever offered for the item.