Tru Turn 2-1/4" Standard 3-Blade Spinner

Tower Stock# LXHME9  •  Manufacturer Stock# 2253B
Tru Turn 2-1/4
Quantity Discounts Available
L5HME902
Save $2.52
2 for $53.46
L5HME903
Save $4.20
3 for $79.77
L5HME906
Save $9.24
6 for $158.70
Notes from our tech department:
This is a 2-1/4" Three-Blade Aluminum Spinner
w/Aluminum Backplate from Tru Turn.

FEATURES

Precision machined from barstock aluminum.
Polished aluminum color with a brushed look.
Easy to install, bolt-on design that centers spinner perfectly on its
baseplate.
Spinner cone is recessed to mate into the spinner backplate. The
rear of the spinner is flat, without an overhanging cone.
Includes 10-32 x 1" bolt for holding spinner cone to backplate.
Adapter kits for different engine sizes are available separately.
(See COMMENTS)
Ninety day limited warranty

INCLUDES

One Aluminum Spinner Cone
One Aluminum Backplate (See SPECS For Sizes)
One 10-32 x 1" Mounting Bolt
One Tru Turn Decal Sheet
One instruction and safety tips header card

REQUIREMENTS

One Spinner Adapter Kit (See COMMENTS)
4mm hex wrench for bolt

SPECIFICATIONS

Spinner Backplate Diameter: 2-1/4" (57mm)
Spinner Backplate Mounting Ring Thickness: 3/16" (5mm)
Spinner Backplate Hole Diameter: 3/8" (9.5mm)
Length From Back Of Backplate To Front Of Cone: 2-1/4" (57mm)
Height Of Propeller Slot: 3/4" (19mm)
Length Of Propeller Slot: 7/8" (22mm)
Weight: 1.9 oz (55g)
Prop Range: Up to a Zinger 11x8 3-blade
Engine Range: Generally .25 - .61 cu in (4.1cc - 9.9cc) but can be
slotted for nearly any prop/engine combo that will fit into the
cone

COMMENTS

Warning: Failure to follow the instructions printed on the card may
cause the propeller to separate from model.
The spinner cone must not touch the propeller at any point, only
Tru Turn should modify the spinner.

Spinner Adapter Kit will be determined by engine crankshaft
size. Use one of the following:
TRUQ3040: (1/4 - 28) (1/4" Bushing) (TT-0140-A)
OS Max 20-60, K&B 19-65, Enya 25-53, HP 21-61,
Fox 19-50, Webra 28-80, Irvine 20-61, Peco 21-45
(1/4" - 28) (7mm Bushing) (TT-0147-A)
SuperTigre 25-60, Como 19-61, OPS 40-60
TRUQ3060: (5/16" - 24) (5/16" Bushing) (TT-516-A)
OS Max 60FP, 61 FX & SF, SuperTigre 61-90 and G2300,
Fox 60-120, Como 75-90
TRUQ3063: (5/16" - 24) (8mm Bushing) (TT-0518-A)
OS Max 61-90 (2-Stroke), HP 120 (4-Stroke)
TRUQ3066: (5/16" - 24 Jam Nut) (8mm Bushing) (TT-0522-A)
OS Max 70-120 Surpass (4-Stroke) 140RX (2-Stroke),
Abitar 120 (4-Stroke)
TRUQ4010: (8 x 1.0mm) (8mm Bushing) (TT-0810-A)
Enya R 120 (4-Stroke), OPS Super 60 & 61 5-Port,
HP 120 (4-Stroke)
TRUQ4015: (8 x 1.0mm Jam Nut Kit) (8mm Bushing) (TT-0814-A)
YS 90-120 (4-Stroke)
TRUQ4025: (8 x 1.25mm) (8mm Bushing) (TT-825-A)
All YS (2-Strokes), OPS Maxi 30, Rossi 40-61, Peco 60-80,
Webra 61-120 (All)
TRUQ3065: (3/8" - 24) (No Bushing Required) (TT-375-A)
OS Max 1.08, Maloney 1.00 & 1.25, Enya 2.40,
Technopower (All), Brison (All)
TRUQ3025: (10 x 1.25mm) (No Bushing Required) (TT-0125-A)
Super Tigre 2000 - 3000 (4500 & 6000 12mm Reaming
Required) (Not For The G2300, Use TRUQ3060)
TRUQ3027: (10 x 1.25 x 50mm) (Hex Cap Screw-No Bushing) (TT-0127-A)
Zenoah G-45 & G62
(10 x 1.25 x 55mm) (Hex Cap Screw-No Bushing) (TT-0127AL)
MacMinarelli 70 & 85
TRUQ3047: (1/4" - 28 Jam Nut) (TT-0149-A)
OS Max 26, 40, 48, 52 Surpass (4-Stroke)
TRUQ3064: (5/16" - 24) (Long Jam Nut) (8mm Bushing) (TT-0520-A)
OS Max 1.20 Flat Twin & Up

jxs 8/27/04
ir/jxs

Resources
See Tower Catalog page 75.
‐ Mailing Address ‐
‐ Additional Contact Information ‐